Select your vehicle

Moog Steering Tie Rod End – Right Outer – DS300044

Moog

Shop Dodge Ram 2500 Tie Rod Ends on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 4WD 2008 Ram 1500, 2003–2010 Dodge Ram and 2011–2013 Ram 2500 and 3500
  • Right outer tie rod end
  • Greaseable socket with protective cover plate

Description

Overview

The Moog DS300044 is a right outer tie rod end for 4WD Dodge and Ram trucks. It fits the 2008 Ram 1500, the 2003–2010 Ram 2500 and 3500, and the 2011–2013 Ram 2500 and 3500. It is part of the Problem Solver line.

An exclusive cover plate guards the bearing surface against contaminants, and the greaseable socket lets fresh lubricant push contaminants out, which reduces corrosion and wear. The powdered metal gusher bearing passes grease to the stud for less friction, a patented cover plate holds tighter tolerances, and the Sunoloy-coated bearings are patent pending for smooth stud movement. Loose or worn chassis parts can lead to premature tire wear.

Key features

  • Right outer tie rod end
  • For 4WD models
  • Exclusive cover plate
  • Greaseable socket
  • Powdered metal gusher bearing
  • Patented cover plate
  • Sunoloy-coated metal bearings, patent pending

Right-side wear and inspection

A right outer tie rod end takes steering load on every turn, so play in its socket shows up quickly as vague steering or a wandering front end. On a 4WD truck, the outer end also works with the drag link and the steering arm, so wear in one part can change how the others load up.

When replacing the right outer end, check the adjusting sleeve and the inner joint at the same time. Re-check toe after the new end is installed, since the length of the assembly sets alignment. Keeping the boot intact and greasing the socket at service intervals helps the new part last.

  • Looseness at the stud when the wheel is moved
  • Clunking over bumps
  • Steering pull after rough trail use

Specifications

Brand Moog
Part number DS300044
Product Right outer tie rod end
Drivetrain 4WD models
Product line Problem Solver
Socket Greaseable
Bearing Powdered metal gusher design
Fitment type Direct fit

Vehicle fitment

It fits the 2008 Dodge Ram 1500, the 2003–2010 Dodge Ram 2500 and 3500, and the 2011–2013 Ram 2500 and 3500, including Power Wagon versions.

It is for the right side of 4WD trucks only. The Ram 1500 fit covers 2008 only, and left-side and 2WD applications are not covered. Confirm your vehicle’s year, model and trim before ordering.

Fitment

VehicleYearsTrims
Dodge Ram 15002008Laramie, SLT, ST, SXT
Dodge Ram 25002003–2010Laramie, Power Wagon, SLT, ST, SXT, Sport, TRX, TRX4
Dodge Ram 35002003–2010Laramie, SLT, ST, SXT, Sport, TRX4
Ram 25002011–2013Big Horn, Laramie, Laramie Longhorn, Lone Star, Outdoorsman, Power Wagon, SLT, ST, Tradesman
Ram 35002011–2013Big Horn, Laramie, Laramie Longhorn, Lone Star, SLT, ST, Tradesman

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Which side is the Moog DS300044?

It is the right outer tie rod end for 4WD models, so the left side of the vehicle needs its own separate tie rod end from Moog.

What trucks does the DS300044 fit?

It fits the 2008 Dodge Ram 1500, the 2003–2010 Dodge Ram 2500 and 3500, and the 2011–2013 Ram 2500 and 3500 in 4WD form.

Is the DS300044 greaseable?

Yes. The socket is greaseable, so new lubricant can flush contaminants out of the assembly, which Moog says reduces corrosion and wear in service.

Does a right outer tie rod end need an alignment afterward?

Yes. Replacing the outer end changes the length of the assembly, so toe should be checked and set after the new part is installed and the jam nut is tightened.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dodge Ram 2500 Tie Rod Ends on Amazon