UTV Suspension & Axles
Showing 13–24 of 49 resultsSorted by popularity
-
UTV Lift Kits
Rough Country 3″ Can-Am Lift Kit – 97035
- Rough Country 3-inch aluminum lift kit for Can-Am Defender UTVs, part number R/C97035
- Full 3 inches of lift from front to rear for increased ride height
- Room for tires up to 28 inches
- Requires a spring compressor for strut disassembly
SKU: R/C97035 -
UTV Lift Kits
Rough Country 3″ Can-Am Lift Kit – 97002
- Rough Country 3-inch aluminum lift kit for Can-Am Defender UTVs, part number R/C97002
- Full 3 inches of lift from front to rear with front and rear preload spacers
- Clearance for tires up to 28 inches.
- Requires a spring compressor for strut disassembly
- Covers Defender models from 2016 to 2026; Lone Star and X mr models are excluded
SKU: R/C97002 -
-
-
-
-
UTV Suspension Accessories
High Lifter Products Spring Adapter Kit – SPRP-ADAPTER
- Spring adapter kit for High Lifter front or rear springs
- Part number SPRP-ADAPTER from High Lifter Products
- One kit is needed per High Lifter spring kit
- Required on 2011–2014 models with a stamped steel collar
SKU: HLPSPRP-ADAPTER -
UTV Axles
High Lifter Products Outlaw DHT Axle (Front) – DHT-RZR9S-F
- Fits 2015–2018 Polaris General, RZR 900, RZR 4 900 and RZR S models
- Front axle with a dual heat treatment (DHT) process
- Puncture-resistant TPE boots that High Lifter says resist fatigue and wear
- Part number HLPDHT-RZR9S-F from High Lifter Products
SKU: HLPDHT-RZR9S-F -
UTV Axles
High Lifter Products Outlaw DHT Axle (Front) – DHT-RZR1-F
- Fits 2014–2018 Polaris RZR XP 1000 and RZR XP 4 1000
- Front axle with a dual heat treatment (DHT) process
- Puncture-resistant boots made from TPE (Thermoplastic Polyester Elastomer)
- Dual heat treated for durability
- Part number HLPDHT-RZR1-F from High Lifter Products
SKU: HLPDHT-RZR1-F -
UTV Control Arms
High Lifter Products Front Forward Control Arms (Silver) – MCFFA-RNG9-S
- High Lifter Products silver Max Clearance front forward control arms, part number HLPMCFFA-RNG9-S
- Arched upper and lower control arms with clearance for tires up to 30 inches
- Works with High Lifter 2-inch and 4-inch Ranger 900 lift kits
- Fitment list covers Polaris Ranger models from 2013 to 2018
- Front Outlaw DHT axles and BUMPER-RNG9 or similar bumpers need extra steps
SKU: HLPMCFFA-RNG9-S -
UTV Control Arms
High Lifter Products Front Forward Control Arms (Red) – MCFFA-RZR1-R
- High Lifter Products red front forward control arms, part number HLPMCFFA-RZR1-R
- Arched lower control arms for Polaris RZR XP models from 2014 to 2016, including the Turbo
- Bolt on like the factory arm, with clearance from arching in two places
- Works with High Lifter 2-inch lift kits
- Turbo and FOX Edition models require removing the front sway bar
SKU: HLPMCFFA-RZR1-R -
UTV Lift Kits
High Lifter Products 4″ Signature Series Lift Kit – PLK1000R-50
- High Lifter Products 4-inch Signature Series lift kit, part number HLPPLK1000R-50
- Lists fitment for the 2017–2018 Polaris Ranger Crew XP 1000 and the 2017 Polaris Ranger XP 1000
- Relocated shock mounts add 4 inches of lift
- Bolt-on application with precision cut, zinc plated parts
- Other Ranger years and models are outside this fit
SKU: HLPPLK1000R-50
What this category covers
Side-by-sides take a lot of abuse from jumps, rocks, and sand, and the suspension and driveline parts are the first to wear. This category includes bolt-on lift kits, adjustable radius rod kits, tie rod kits, chassis braces, control arms and bushings, limit straps, shock reservoir caps, and axles, including OE-style CV axles and heavier aftermarket shafts.
Choosing parts by goal
- Worn bushings and clicking axles: OE replacement CV axles and polyurethane bushings restore stock feel.
- Bent or broken parts: tougher radius rods, tie rods, and control arms are built to resist trail damage.
- Larger tires: a lift kit adds ground clearance, but the CV axles and joints then run at steeper angles.
- Reliability: seal savers and boot protection help keep dirt out of CV joints.
Specs to compare
For axles, compare whether the part is front or rear, left or right, and whether it is an OE replacement or a heavy-duty design made from alloy steel. For control arms and radius rods, compare material, adjustability, and whether the arm is direct fit. For lift kits, the product title states the lift height, such as 3 or 4 inches or larger Big Lift designs. Bushings come in different hardness levels, and colors often indicate a material type, but check the product details rather than assuming.
Installation notes
Many UTV parts install with hand tools, but suspension and axle work affects steering and braking, so follow torque specifications carefully and replace any locknuts that are not reusable. After a lift, check shock length, brake line slack, and axle angles. If the vehicle feels different after installation, stop and inspect before riding. A shop familiar with side-by-sides can help with alignment and geometry.
Compatibility
UTV parts are specific to make, model, and often model year, wheelbase, and number of seats. Confirm fitment for your exact vehicle and check the manufacturer specifications. Universal-fit items may still need the right length or width, so measure before choosing.
Keep a basic spares kit on the trail, including a spare axle for your model, a tie rod, and the sockets needed to change them. UTVs often go places where help is hours away, and a roadside swap can end a bad day quickly. Clean and inspect boots after muddy or sandy rides.
Maintenance and inspection
Side-by-sides deserve a check after every hard ride. Look at the CV boots for tears or grease spray, which means dirt will soon get in. Wiggle each wheel to feel for play in bushings, ball joints, and wheel bearings, and inspect control arms and radius rods for bends. Check bolts that tend to loosen, especially on lifted machines, and tighten them to specification. Clean mud out of the suspension, since packed dirt hides cracks and wears bushings. Greasable parts need grease at the intervals in the owner manual. When replacing axles, replace them in matched pairs if both show wear, and carry the tools for a trail repair. Heavy-duty parts help only if the rest of the driveline can handle the load.
Popular UTV Suspension & Axles brands
- Assault Industries (9)
- Energy Suspension (9)
- High Lifter Products (9)
- TrakMotive (6)
- SealSavers Products Inc (5)
- Cognito Motorsports (4)
- Rough Country (3)
- Hypertech (2)
- King Shocks (1)
- Motor Master Powersports (1)
Shop UTV Suspension & Axles by type
- UTV Suspension Accessories (17)
- UTV Axles (13)
- UTV Lift Kits (7)
- UTV Tie Rods (4)
- UTV Radius Rods (4)
- UTV Control Arms (3)
- UTV Shocks (1)
UTV Suspension & Axles FAQ
What does a UTV lift kit change?
A lift kit raises ride height for more ground clearance and larger tires. It can also change axle and shock angles, so consider upgraded axles or limit straps and check the manufacturer specifications.
Are OE replacement CV axles good enough?
For a stock or lightly modified UTV, a quality OE-style axle restores factory function. Heavily modified or aggressively driven machines may benefit from stronger aftermarket shafts. Match the axle to your use.
How do I find the right UTV axle?
Identify the exact make, model, year, and position, front or rear and left or right. Compare these with the fitment and part number on the product page, and check the manufacturer specifications.
What is a radius rod?
A radius rod is a suspension link that locates the rear axle or hub carrier front to back. Adjustable versions let you fine-tune alignment, and heavy-duty versions resist bending when you hit obstacles.











