Overview
The Energy Suspension ENE70.7009R is a red polyurethane front control arm bushing for the RZR XP 1000. Polyurethane holds a firmer shape than rubber under load, which limits movement in the front arm joint.
The red bushing is made of polyurethane, the material at the center of Energy Suspension’s line for over 30 years.
Front arm bushings are the pivot points where each control arm meets the frame. Under braking and cornering they carry much of the lateral load, and as the rubber or urethane wears, the arm can shift and affect tracking and tire wear. Replacing them is a common step in refreshing a worn front end.
Key features
- Red finish
- Front control arm position
- Polyurethane construction
- Part number ENE70.7009R
Replacing front arm bushings
Front arm bushings are the pivot points where each control arm meets the frame, and they manage the forces from braking and cornering. Wear shows up as a shifting arm, changed steering response, and uneven tire wear on the front tires. A simple check is to lift the front wheel and look for movement between the arm and the frame when you apply light force by hand.
Plan the job before you pull the old bushings. Clean the arm bore, measure it, and confirm the new sleeve fits without forcing it. Check the other front suspension joints at the same time, since loads are shared, and tighten fasteners to the torque in your service manual. Recheck the hardware after the first few rides.
- Confirm the bore size before pressing
- Recheck fasteners after the first rides
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | ENE70.7009R |
| Material | Polyurethane |
| Color | Red |
| Position | Front control arm |
| Model named in title | RZR XP 1000 |
Vehicle fitment
Confirm the exact years and trim that fit your machine before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Inspect the kit when it arrives and match the bushing count to your installation plan.









