Select your vehicle

UTV Performance under UTV Parts & Accessories covers drivetrain and engine upgrades for side-by-sides: Gates G-Force C12 carbon-cord CVT belts for Polaris Ranger, General, RZR and RZR Turbo and Can-Am Maverick, High Lifter 3GX belts and snorkel kits, K&N washable air filters for the Ranger, Hypertech tuners, a Cognito Motorsports extreme duty engine and transmission mount kit and RacePak gauges. Subcategories cover air filters, engine accessories, gauges, intake kits and tuners. Match your machine below.

Shop UTV Performance by type

Showing 1–12 of 19 resultsSorted by popularity

Where UTV performance starts

On a side-by-side, performance is as much about keeping the machine alive under load as about adding power. The CVT belt is the single most common failure in the dunes, mud or on a long climb, so belts make up most of this category. Behind them come air filters and snorkels that keep dust and water out of the engine and clutch, mounts that stop the drivetrain from moving under big tires, tuners that adjust fueling and limiters, and gauges that let you watch belt and engine temperature. All of these parts are specific to a machine's model and year, and the listings reflect that.

Choosing a CVT belt

The Gates G-Force C12 belts here are carbon-cord belts with a double-notched profile and a 25 or 26 degree angle, listed by outside circumference and top width for each application: the 2014 and 2015 Ranger 570, 800 and 900, the 2016 to 2019 General 1000, the 2016 to 2019 RZR 900 and RZR S 900, the RZR S 1000 and XP 1000, the 2013 and 2014 Can-Am Maverick, and the 2016 and 2017 to 2019 RZR XP Turbo. High Lifter's 3GX belts for Polaris 900 and 1000 models use high-temperature neoprene with aramid fiber. Carbon cord belts resist stretch and run cooler under sustained load, which suits turbo machines and heavy tires. Gates states that no clutch adjustment is needed at installation on its C12 belts, which keeps the job to a cover removal.

  • Match the belt to your exact model and year; a belt that is a tenth of an inch off in circumference changes engagement and can slip or grab.
  • Carry a spare belt and the tools to change it on every ride.
  • Break in a new belt with 20 to 30 miles of easy driving and varied throttle before working it hard.
  • Clean the clutch sheaves with a scuff pad and brake cleaner when the belt is off; glazed sheaves destroy new belts.

Air filters and snorkels

The K&N filters here are washable pleated cotton gauze elements that drop into the factory airbox on machines such as the 2012 to 2014 Ranger 400 and need no fuel changes. In fine dust a pre-filter sock extends service intervals. The High Lifter snorkel kit for the 2017 and 2018 Ranger XP and Crew XP raises the engine intake, CVT intake and exhaust vents above the water line and includes differential bellows, which is essential if the machine sees deep mud or water crossings. Snorkel kits require cutting the body in the places the kit specifies.

Mounts, tuners and gauges

Big tires and aggressive driving load the engine and transmission mounts, and a cracked mount lets the drivetrain shift and misalign the clutch. The Cognito Motorsports extreme duty mount kit replaces the mount tube and mounts with chromoly and billet parts and heavy-duty isolators. Hypertech tuners adjust speed limiters, rev limits and fueling for tire size and aftermarket exhaust; use only tunes made for your engine and intake setup. A RacePak or similar gauge that reads belt temperature and engine data lets you back off before a belt cooks.

Safety and compatibility

Changing power output, tire size or gearing on a UTV affects braking and stability, and belt failures at speed can damage the clutch housing. Install belts and mounts per the maker's torque specifications, re-torque mounts after the first ride, and confirm every part against your exact model, year and engine before choosing.

Popular UTV Performance brands

UTV Performance FAQ

How do I know when my UTV belt needs replacing?

Look for glazing, cracks at the base of the cogs, frayed edges, missing cog chunks or a width worn below the maker's minimum. Belt slip on hard acceleration, a burning smell, or a belt temperature warning are signs it is already slipping. Many riders replace belts on hours or miles before they fail.

Is a carbon cord belt worth it over a stock-style belt?

For machines with larger tires, turbo engines or riders who run long climbs and dunes, yes. Carbon cords resist stretch and run cooler under sustained load, which keeps engagement consistent and lengthens life. On a lightly used stock machine the difference is smaller.

Do I need to adjust the clutch after installing a new belt?

Gates states that its G-Force C12 belts need no clutching adjustment at installation because they match the OEM dimensions. Any belt change is a good time to clean the sheaves and check the clutch for wear. Follow a 20 to 30 mile break-in before heavy use.

Will a snorkel kit let me drive my UTV through deep water?

A snorkel kit raises the engine intake, CVT intake and exhaust vents above the body line, which protects them in mud and water crossings up to roughly seat height. It does not seal electrical connectors or the differentials beyond the included bellows, so cross slowly and check fluids after deep water.