Overview
The Cognito Motorsports long travel rear axle shaft, part COG460-90016, is a UTV rear axle shaft made from 300M forged steel for long travel suspension setups.
The forged 300M steel is intended to be stronger than stock while keeping the same spline as the OEM part, so the splines match the original axle.
Key features
- 300M forged steel construction
- Long travel design
- Stronger than stock, per the maker
- Same spline as the OEM part
Axle shafts under long travel
A longer suspension moves the axle through a wider arc, so the shaft is working through bigger joint angles than stock. Angle is the main limit on a shaft of this type. Steep joint angles load the joints harder and can cause vibration, binding at full steering lock, or early wear in the boots and bearings.
When choosing a shaft, match the spline count and overall length to the axle on your machine, then check how the new length sits at both ends. Confirm the wheel bearing and hub are in good condition, since a new shaft will not fix worn parts on its own. Check the axle retention hardware at each service interval.
Watch for signs of wear after rough runs. Torn boots, grease leaking from a joint, clicking through turns, and vibration under throttle all point to a joint or shaft that needs inspection. Address the cause before returning to hard use.
- Check joint angles at full travel
- Inspect boots and grease for leaks
- Recheck retention hardware after the first few rides
Specifications
| Brand | Cognito Motorsports |
|---|---|
| Part number | COG460-90016 |
| Type | Long travel rear axle shaft |
| Material | 300M forged steel |
| Spline | Same as the OEM part |
| Application | UTV |
Vehicle fitment
Confirm the make, model and year of your UTV, along with its axle spline and length, before ordering.
Installation notes
Long travel shafts change axle length and driveline angles, so check the joint angles after installing the shaft and any suspension changes that go with it.









