Overview
The Radius Rod Cage, part number 360-90007, strengthens the frame-side mounting locations for the upper and lower radius rods on the Polaris RZR models it fits. It uses a double capture system to hold the rods more securely at the frame.
The cage is built for both recreation and competition use. The stock radius rod unit can fail under hard use, and the cage is an upgrade over it. No cutting or welding is needed to install it.
Key features
- Double capture system at the frame-side mounts
- Strengthens the mounting locations for upper and lower radius rods
- No cutting or welding required
- Designed for recreation and competition use
- An upgrade over the stock unit for frame-side rod mounts
Frame mounts under load
Radius rods transfer axle loads into the frame, so the frame-side mounts take a lot of force during hard acceleration, braking and landings. When those mounts flex or crack, the rods lose their position and the axle can move out of line. Frame-side reinforcement helps keep the rods where they are meant to be.
A cage that works through the existing mounts is easier to install when the mounts are clean and straight. Remove dirt and debris before fitting, and check the bolt holes for elongation. Confirm the rods move freely in the cage without binding, since a tight fit can add stress to the ends.
Recheck fasteners after the first few rides, and inspect the mounts after rough trail work or any impact. If a mount shows cracking, replace the affected part before continuing to use the vehicle hard.
- Clean and inspect frame mounts before fitting
- Check bolt holes for elongation
- Recheck fasteners after the first few rides
Specifications
| Brand | Cognito Motorsports |
|---|---|
| Part number | 360-90007 |
| Mount design | Double capture system |
| Mounting location | Frame side, upper and lower radius rods |
| Installation | No cutting or welding required |
Vehicle fitment
It fits the 2014–2017 Polaris RZR XP 1000 and RZR XP 4 1000, and the 2016 Polaris RZR XP Turbo and RZR XP 4 Turbo.
Other RZR model years and the RZR S, RZR 900 and General models are not covered.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires no cutting or welding. The cage pairs with the adjustable radius rods, which fit the same vehicles.
What’s included
Check the package contents against your installation before starting.










