Overview
The red front control arm bushings are polyurethane bushings for the front control arms of the Polaris RZR 800 and RZR 800S, part number ENE70.7006R.
Energy Suspension says its decision more than 30 years ago was to specialize in polyurethane and only polyurethane. The company describes its material as proprietary and says its chemists keep working on it.
Key features
- Polyurethane construction
- Red color
- Front control arm position
- Designed for the Polaris RZR 800 and RZR 800S, per the product name
Signs of a worn bushing
Front control arm bushings wear slowly, and the first sign is often a loose or clunking feel when the machine goes over ruts or during hard braking. Look for cracked, torn or flattened bushing material, and for play in the arm when you rock it by hand with the wheels off the ground. Side-by-side owners often notice uneven tire wear or a wandering steering feel before a bushing fails outright.
When replacing front bushings, it is common to inspect the ball joints, tie rod ends and the other arm bushings at the same time, since they wear under the same loads. Polyurethane resists deformation well, but it transmits more vibration into the frame than rubber does, so tighten the mounting hardware to the value in your service manual and recheck it after the first few trail runs.
- Check the bushing bore for scoring before pressing in a new bushing
- Look for movement between the sleeve and the arm
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | ENE70.7006R |
| Material | Polyurethane |
| Color | Red |
| Position | Front control arm |
| Application | Polaris RZR 800 and 800S, per product name |
Vehicle fitment
It is designed for the RZR 800 and RZR 800S front control arms. Compare the bushing with your control arm before fitting it.
It is identified with the RZR 800 and RZR 800S only. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacing the bushings usually means pressing the old ones out of the front control arm and pressing the new ones in. Inspect the arm for wear and check the bushing bore before fitting.
What’s included
The red front control arm bushings.
Not included: the control arm the bushings fit into.









