Overview
The High Lifter Products 7-inch Big Lift DHT XL in black, part number HLPPLK-DXL-GEN1-1-B, is a suspension lift kit for the 2016–2018 Polaris General 1000 4 Seater. The kit is designed to clear tires up to 34.5 inches.
A lift raises the vehicle for more ground clearance and room for larger tires. Because the lift changes suspension geometry, this kit has specific installation requirements: the new rear control arm must be drilled to take a 12mm bolt. High Lifter positions the kit for deep mud and larger tires, and replacement bushings are available if they are needed later.
Key features
- 7-inch lift height
- Clears tires up to 34.5 inches
- All-inclusive kit, per High Lifter Products
- Replacement bushings available if needed
- Black finish
Lift height and driveline angles
A suspension lift raises the body, which changes the angle of the driveshafts and the geometry of the control arms. Larger tires add rotating weight and can rub on the fender or frame at full steering. A lift also raises the center of gravity, so the vehicle handles differently on slopes and in ruts.
After any lift, have the alignment and driveline angles checked by a shop that works on off-road builds. Re-check control arm bolts and bushings after the first rides, and look for rubbing on the tires, brake lines and wiring during full suspension travel.
- Check driveline angles after installation
- Re-torque control arm bolts after the first rides
- Inspect bushings for wear or cracks
- Watch for tire rub at full steering lock
Specifications
| Brand | High Lifter Products |
|---|---|
| Part number | HLPPLK-DXL-GEN1-1-B |
| Lift height | 7 inches |
| Maximum tire size | 34.5 inches |
| Finish | Black |
| Rear control arm | Requires drilling for a 12mm bolt |
Vehicle fitment
It is a lift kit for the 2016–2018 Polaris General 1000, 4 Seater.
Other General generations and RZR lines are outside this kit’s fit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The new rear control arm must be drilled to accept the 12mm bolt that replaces the 10mm bolt used on past models. Replacement bushings are available if needed. Because a lift changes ride height and suspension geometry, have the alignment and driveline angles checked after installation.
What’s included
The kit is designed as a complete set. Check the package contents against your installation before starting.
