Select your vehicle
-13%

Energy Suspension RZR XP 1000 Front Control Arm Bushings (Black) – 70.7009G

Energy Suspension

$52.73In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 2:00 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Front control arm bushing in black polyurethane
  • Part number ENE70.7009G from Energy Suspension
  • Made for the RZR XP 1000 front control arm
  • No model years listed; verify before you fit

Description

Overview

The Energy Suspension ENE70.7009G is a black polyurethane front control arm bushing for the RZR XP 1000. Polyurethane is firmer than rubber, so the bushing gives less flex at the front arm when the suspension is loaded.

This black front bushing is part of Energy Suspension’s polyurethane line, which the brand has focused on for over 30 years.

A front control arm bushing sits where the arm pivots on the frame, so it takes the side and fore-and-aft loads from the wheel. Worn bushings let the arm move, which can change alignment and make steering feel loose, so they are often replaced as part of a front suspension refresh.

Key features

  • Polyurethane construction
  • Black finish
  • Front control arm position
  • Part number ENE70.7009G

Front arm inspection

The front control arm bushings carry braking and cornering loads, so they wear faster than most suspension parts on a machine that runs rough terrain. Early signs include a loose, clunking feel over bumps, wandering steering, or uneven front tire wear. When the bushing sleeve starts to move inside the arm, the alignment can change even though the rest of the suspension looks fine.

Before buying a replacement, verify that the bushing’s inside and outside diameters match the arm you are fitting. If you are also upgrading shocks or control arms, check that the new parts share the same mounting dimensions. Polyurethane keeps its shape better than rubber under load, but it sends more vibration into the frame, so tighten the hardware and recheck it after the first few rides.

  • Check for play by rocking the arm with the wheel off the ground
  • Inspect the sleeve for cracks or separation

Specifications

Brand Energy Suspension
Part number ENE70.7009G
Material Polyurethane
Color Black
Position Front control arm
Model named in title RZR XP 1000

Vehicle fitment

Confirm the exact years that fit your RZR XP 1000 before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation before starting, including any sleeves or hardware.

Questions & Answers

Is the ENE70.7009G a front or rear bushing?

Front. It is a front control arm bushing for the RZR XP 1000, so it is not a rear part. Check the mounting position on your vehicle before installing it.

Will this fit a RZR XP 900?

It is identified with the RZR XP 1000 only, so confirm the fit for an XP 900 with your vehicle's year, model and trim before ordering.

What color is this bushing?

It is black, with a polyurethane construction and part number ENE70.7009G. Black is the finish for this front control arm bushing, so confirm the fit for your RZR XP 1000 before ordering.

Do I need a press to replace these bushings?

Usually yes. Front arm bushings are normally pressed out and in, which takes a press or the correct tools and support for the arm. Pressing a bushing in crooked can damage the bore, so set the arm up carefully before fitting.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon