Overview
The SuperSprings SumoSpring Air Helper Spring Set, part SSR-406-47, is a rear load-carrying spring set sold as a left and right pair for the Jeep Wrangler TJ and LJ. Each SumoSpring is a one-piece unit made from patented micro-cellular urethane, so it adds load-carrying support without air lines, compressors or an air reservoir.
Supersprings says SumoSprings enhance load carrying ability, reduce and stabilize sway, and improve overall driver control and ride comfort. Each unit is listed at a 2500 lb capacity at 50% compression, and it compresses up to 80% of its original height with full memory rebound. The springs are aimed at owners who want more rear support when carrying a load.
Key features
- One-piece unit attached at the top and bottom, made from patented micro-cellular urethane
- Progressive spring rate with damping properties
- Compresses up to 80% of original height with full memory rebound
- Allows up to 50% expansion of original body height
- Maintenance-free, with no air lines or compressors required
- Designed so it does not leak or rupture under normal use.
- Designed to reduce and stabilize sway and improve control and ride comfort
Load support for Wrangler owners
Rear urethane helpers add support when a Wrangler carries gear, camping loads or a trailer hitch load, and they help the rear end hold its height instead of sagging. Each unit is a single piece attached at the top and bottom, so the mounting points carry the load every time the suspension moves. The springs work with the existing shocks and bump stops rather than replacing them.
Owners who add rear helpers often find that the shocks and bushings also need attention, because the suspension now works through a different range. Look over the bump stops for cracks, the mounts for play and the shock bodies for leaks. Recheck the tire pressure and the load distribution after a few trips with a full load.
- Inspect rear bump stops for cracks or flattening
- Check mounting points for play or bent brackets
- Recheck tire pressure after loading the vehicle
Specifications
| Brand | Supersprings |
|---|---|
| Part number | SSR-406-47 |
| Position | Rear |
| Sold as | Pair (left and right) |
| Material | Patented micro-cellular urethane |
| Spring rate | Progressive |
| Load capacity | 2500 lb at 50% compression |
| Compression | Up to 80% of original height, with full memory rebound |
| Expansion | Up to 50% of original body height |
| Maintenance | Maintenance-free |
Vehicle fitment
Supersprings lists these SumoSprings for the 2004–2006 Jeep Wrangler (LJ), including Unlimited and Unlimited Rubicon trims, and the 1997–2006 Jeep Wrangler (TJ), including 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Vehicles outside the TJ and LJ years are not covered, including the 2007–2018 Jeep Wrangler JK and the 2018–2022 Jeep Wrangler JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Never load any vehicle beyond its GVWR (gross vehicle weight rating). The urethane helpers add support but do not raise that rating.
What’s included
One pair of SumoSprings Rear, one left and one right.













