Overview
The Tekonsha Prodigy mounting pocket kit, part number TKN7686, is a mounting pocket for holding a brake controller. The catalog files it under brake controller mounting brackets, and the title ties the kit to the Prodigy name.
The kit belongs to the brake controller mounting brackets category, and the Prodigy name is the main guide to which controllers it suits. Check the pocket against your controller’s size and mounting holes before installing it.
Mounting a brake controller
A controller pocket keeps the unit in a fixed, reachable spot so the driver can adjust braking output without looking far from the road. Most drivers mount it low on the dash or the side of the cabin, angled toward them and clear of the steering column, airbag cover and pedals. The spot should also leave room for the cable to run without rubbing or pinching.
Before drilling or using adhesive, confirm the surface is solid and that screws will not reach wiring or ducts behind it. Once mounted, check that the controller can be reached and read with one hand on the wheel, and that the pocket does not rattle over rough roads. Recheck the fasteners after the first few trips.
- Keep the cable away from pedals
- Check that the controller slides in and out smoothly
- Retighten fasteners after the first few trips
Specifications
| Brand | Tekonsha |
|---|---|
| Part number | TKN7686 |
| Product type | Mounting pocket kit |
| Product line | Prodigy |
| Fitment | Universal fit |
Vehicle fitment
No vehicle years are attached to the universal entry. The kit is grouped with brake controller mounting brackets rather than with a specific truck or trailer, so the controller model is the deciding factor. Confirm your vehicle’s year, model and trim before ordering.









