Overview
The DrawTite 75521 is a round tube max-frame Class III/IV hitch mounted at the rear of Chevrolet and GMC trucks. Its 2 inch by 2 inch receiver is rated at 6000 lb gross trailer weight and 600 lb tongue weight, and up to 10500 lb and 1050 lb with weight distribution.
Covered entries include the 1999–2013 Silverado 1500 and Sierra 1500, the HD versions for 2001–2003 and 2005–2006, and the 2500 versions for 1999–2004.
Key features
- Round tube max-frame design
- Class III/IV rating with 6000 lb GTW and 600 lb tongue weight
- Weight distributing ratings of 10500 lb trailer and 1050 lb tongue
- All-welded construction with no adapters.
- Requires OEM bumper and brackets for installation
- Carries a nationwide lifetime warranty.
Roll pan and bumper checks
Round tube max-frame hitches mount to the truck frame and rely on the OEM bumper and brackets to complete the install. Before fitting, look over those bumper parts for rust, bent brackets and worn bolt holes. Replacing a worn bracket before the hitch goes on is far easier than correcting alignment afterward, and it helps the hitch sit square to the frame.
A roll pan does not fit with this hitch, so the rear bumper setup must be confirmed before ordering. Pick a ball mount whose rise matches your trailer coupler height, so the trailer sits level once hitched. Weight distribution setups add spring bars and sway control that should be sized to the hitch ratings, and those parts are worth checking whenever the hitch is removed and reinstalled.
- Clean the receiver tube and pin holes before each season
- Use a lock on exposed receivers to deter theft
- Re-check bolts after the first few trailer trips
- Inspect bumper brackets for cracks after rough off-road use
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 75521 |
| UPC | 742512755213 |
| Hitch class | Class III/IV |
| Tube style | Round tube max-frame |
| Receiver size | 2 inch x 2 inch |
| Position | Rear |
| Gross trailer weight (GTW) | 6000 lb |
| Tongue weight | 600 lb |
| Weight distributing trailer weight | 10500 lb |
| Weight distributing tongue weight | 1050 lb |
| Roll pan compatibility | Does not fit with roll pan |
| Install requirement | OEM bumper and brackets |
Vehicle fitment
Covered entries are the Silverado 1500 and Sierra 1500 from 1999 to 2013, the HD versions of both for 2001–2003 and 2005–2006, and the 2500 versions from 1999 to 2004, each with its listed trims.
Model years 2014 and later, and HD model years outside the listed ranges, are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Inspect the OEM bumper and brackets before you start, since DrawTite requires them for this hitch. Keep the truck supported on stands when working beneath the rear end.
What’s included
Check the package contents against your installation before starting.
Not included: the OEM bumper and brackets, which installation requires.














