Overview
The DrawTite 75691 is a Class III/IV rear max-frame trailer hitch for the 2009–2013 Ford F-150. Its 2 inch by 2 inch receiver is rated at 6000 lb gross trailer weight and 600 lb tongue weight, or 12000 lb and 1200 lb with weight distribution.
Fit covers the 2009–2013 Ford F-150 trims named under Vehicle fitment. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Class III/IV max-frame design
- 6000 lb GTW and 600 lb tongue weight
- 12000 lb weight distributing trailer rating and 1200 lb tongue weight
- No drill required.
- 2 inch by 2 inch receiver opening
- DrawTite says every hitch in its line carries a nationwide lifetime warranty
Matching the hitch to your load
A rear max-frame hitch carries the load from the trailer through the frame rather than the bumper, so the frame condition at the mounting points matters as much as the rating on the receiver. Before towing, look at the frame rails and welds for cracks, rust or bent metal, since a hitch is only as strong as what it bolts to. Tongue weight should stay within the rating for the setup in use and keep the rear of the truck level under load.
Weight distribution changes the numbers you work with. Without equipment, the lower rating applies, so plan the load to that limit. Hitch-mounted accessories such as a ball mount, sway control or a hitch cover add weight and change the tongue load, so count them when calculating totals.
- Check frame rails at the hitch mounts each season
- Re-torque mounting bolts after the first few tows
- Keep the receiver free of rust and debris
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 75691 |
| UPC | 742512756913 |
| Hitch class | Class III/IV |
| Receiver size | 2 inch x 2 inch |
| Position | Rear |
| Gross trailer weight (GTW) | 6000 lb |
| Tongue weight | 600 lb |
| Weight distributing trailer weight | 12000 lb |
| Weight distributing tongue weight | 1200 lb |
| Factory receiver | Fits models without a factory-installed receiver, per the short description |
| Drilling | No drill required |
Vehicle fitment
The hitch fits the 2009–2013 Ford F-150 in FX2, FX4, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, SVT Raptor, XL and XLT trims. Other Ford F-150 years are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Ford F-150 years outside 2009–2013 are not on the list, and the short description’s broader wording does not add other vehicles to it. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
DrawTite lists no drilling for this hitch. Check your F-150 for an existing factory receiver first, and support the truck safely while the hitch is installed.
What’s included
Check the packed contents before installing.














