Overview
The Rugged Ridge 11580.62 is a rear receiver hitch kit with a D-shackle for 2- and 4-door Jeep models. The kit combines a durable powder-coated 2-inch receiver hitch with a plug-in wiring harness, a hitch pin and a heavy-duty D-ring shackle, giving the rear of the vehicle a sturdy attachment point for towing and recovery.
The hitch bolts directly to the factory mounting points on the rear of the vehicle. It is a one-piece welded assembly with a cutout for the factory wiring harness mounting, and the kit suits owners who want a rear receiver and a recovery point in one package.
Key features
- Bolts directly to the factory mounting points on the rear of the vehicle
- Cutout for factory wiring harness mounting
- Durable black powder coat finish
- One-piece welded assembly for added strength
- Plug-in wiring harness included
- D-shackle with a 9,500lbs pulling capacity
Using a D-ring for recovery
A D-ring shackle is a rated attachment point for recovery straps and tow lines, and it is designed to be used in line with the strap rather than at an angle that loads the pin. Connect with a shackle or strap rated for the load, and keep the pull straight to avoid side loading. Before a recovery, check the pin, the bolt and the mounting points for cracks or looseness, and avoid using a damaged point.
Recovery points are often paired with a winch, a snatch block or a tow strap with a recovery-rated loop. Match each piece to the lowest rating in the chain, since a shackle is only as strong as its weakest link. Store the shackle clean and dry, and lubricate the pin threads a couple of times a year so the hardware turns freely.
- Inspect the D-ring pin for bends or wear before use
- Use a strap or line with a matching rating
- Keep recovery gear stored where it stays dry
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11580.62 |
| UPC | 804314269852 |
| Receiver size | 2 inches x 2 inches |
| Position | Rear |
| Weight class | Class II |
| Roll pan | Does not fit with roll pan |
| Finish | Durable black powder coat |
| D-shackle pulling capacity | 9,500lbs |
| Warranty | 5 year limited |
Vehicle fitment
The kit fits 2- and 4-door Jeep models and bolts to the factory mounting points at the rear. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering. The kit does not fit with a roll pan.
Installation notes
Because the hitch uses factory mounting points and a cutout for the factory wiring harness, check that both match your vehicle before starting. Disconnect the battery before working on the trailer wiring.
What’s included
The kit includes a durable powder-coated 2-inch receiver hitch, wiring harness, hitch pin and heavy-duty D-shackle assembly.




















