Overview
The Rugged Ridge 11580.51 is a Class II rear hitch kit for the Jeep Wrangler JK, with a 2 inch receiver opening. It fits the 2007 through 2018 Wrangler JK in two-door and four-door bodies.
The kit bolts directly to the factory mounting points at the rear of the vehicle, with a design very similar to the OE receiver hitch. A cutout accommodates the factory wiring harness, and the hitch is a one-piece welded assembly.
Key features
- One-piece welded assembly for added strength
- Powder coat finish that sheds water and resists rust
- Cutout for the factory wiring harness
- Bolts to the factory mounting points at the rear
- Plug-in wiring harness listed with the hitch
- Tow ratings of 3,500-lb with weight distributing equipment and 2000-lb otherwise
Before you tow
A rear hitch is the connection point for every trailer you tow, so it carries the forces of braking, acceleration and tongue weight in one place. The rating on a hitch assumes the rest of the tow setup is also sound. Check that the trailer’s coupler, safety chains and brake connection match the hitch class before each trip, and confirm that the vehicle’s cooling and braking capacity suit the load.
Weight distributing equipment is a separate purchase and must be matched to the hitch, the tongue weight and the trailer’s axle rating. Many owners also add a trailer wiring adapter and a brake controller when towing with electric brakes. Over time, road salt and trail debris can work into welds and bolt holes, so inspect the hitch and its fasteners periodically and touch up any chipped finish before rust starts.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11580.51 |
| UPC | 804314230609 |
| Hitch class | Class II |
| Receiver size | 2 inch x 2 inch |
| Position | Rear |
| Tow rating with weight distributing equipment | 3,500 lb |
| Tongue weight with weight distributing equipment | 350 lb |
| Tow rating without weight distributing equipment | 2000 lb |
| Tongue weight without weight distributing equipment | 200 lb |
| Finish | Powder coat |
| Roll pan compatibility | Does not fit with roll pan |
Vehicle fitment
It fits the 2007 through 2018 Jeep Wrangler (JK) in two-door and four-door bodies. Confirm fit for your vehicle’s year, model and trim before ordering.
Other Wrangler generations, such as the TJ and LJ, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit bolts to factory mounting points and includes a cutout for the factory wiring harness, so route the harness through that cutout before final tightening.
What’s included
The kit includes a hitch and a plug-in wiring harness. Check the package contents against your installation before starting.
































