Overview
The DrawTite 75658 is a Class III/IV max-frame trailer hitch for the rear of the 2009–2012 Volkswagen Tiguan in S, SE, SEL and Wolfsburg Edition trims. It is rated for 3500 lb gross trailer weight and 350 lb tongue weight.
Installation requires trimming the bumper fascia, and no drilling is needed.
Key features
- Class III/IV rear max-frame design
- 3500 lb GTW rating
- 350 lb tongue weight rating
- No drilling required
- Bumper fascia trimming required
- Receiver is 2 inches by 2 inches.
Tongue weight on a compact SUV
Tongue weight is often the limit that matters most on a compact crossover. Keep the load on the hitch within the rating, and place cargo in the trailer or toward the front of the vehicle so tongue weight stays where it belongs. A hitch of this class suits light trailers and bike racks, and heavier loads call for more careful weighing.
Because installation requires trimming the bumper fascia, take extra care with the plastic. Mark the cut lines before cutting, smooth the edges, and check that the trimmed fascia still clears the hitch and any sensors. Plastic fascia can crack under stress, so inspect it after the first few tows and before longer trips.
- Check parking sensors after trimming the fascia
- Keep trimmed fascia pieces and fasteners together
- Weigh the tongue load with a scale before long trips
- Replace cracked fascia edges before they spread
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 75658 |
| UPC | 16118660098 |
| Hitch class | Class III/IV |
| Receiver size | 2 inch x 2 inch |
| Position | Rear |
| Gross trailer weight (GTW) | 3500 lb |
| Tongue weight | 350 lb |
| Install requirement | Fascia trimming |
| Drilling | No drilling required |
Vehicle fitment
It is a direct-fit rear installation for the 2009–2012 Volkswagen Tiguan in S, SE, SEL and Wolfsburg Edition trims.
Tiguan model years after 2012 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plan to trim the bumper fascia before fitting the hitch, since DrawTite lists fascia trimming as required. Check the fit against the hitch before final mounting.
What’s included
Check the hardware in the box against the installation steps before fitting.














