Overview
The DrawTite 75515 is a Class III/IV rear max-frame trailer hitch for the 2007–2012 Jeep Wrangler JK, in two-door and four-door bodies. It has a 2 inch square receiver and is custom built for each vehicle application.
The hitch is rated up to 3,500 lbs gross trailer weight for weight carrying and up to 4,000 lbs for weight distributing setups. DrawTite’s details say it attaches at all frame attachment points and needs no drilling.
Key features
- Solid, all-welded construction
- Black powder coat finish
- Attaches at all frame attachment points
- Custom built per vehicle application
- No drilling required
- 2 inch square receiver tube opening
Matching ratings to your tow
A receiver hitch carries trailer loads through the frame, so its rating is one part of a complete towing setup. Match the trailer’s gross weight and tongue weight to the lower of the hitch, ball mount and trailer limits. Weight distribution setups add their own ratings, so keep the hitch, spring bars and sway control within the same range, and never exceed the lowest figure in the setup.
Max-frame hitches sit behind the bumper and tie into the frame at the attachment points. After the first few tows, inspect the welds, hitch bolts and receiver for cracks, looseness or rust. Road salt and grit can work into the tube, so rinse the receiver after winter driving and keep it clean so pins and ball mounts seat fully.
- Confirm ball mount shank size matches the 2 inch receiver
- Re-check hardware after the first few trips
- Touch up chips in the powder coat to slow corrosion
- Remove the ball mount when not towing to limit rust
Specifications
| Brand | DrawTite |
|---|---|
| Part number | 75515 |
| UPC | 742512755152 |
| Hitch class | Class III/IV |
| Receiver opening | 2 inch square |
| Position | Rear |
| Finish | Black powder coat |
| Weight carrying rating | Up to 3,500 lbs GTW |
| Weight distributing rating | Up to 4,000 lbs GTW |
| Mounting | All frame attachment points |
| Drilling | No drilling required |
| Body styles | Two-door and four-door models |
Vehicle fitment
It fits the 2007–2012 Jeep Wrangler (JK) in 70th Anniversary, Rubicon, Sahara, Sport and X trims, plus the Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited X versions.
Wrangler model years after 2012 and earlier generations such as the TJ and LJ are not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the hitch is custom built per vehicle application, confirm your Wrangler’s body style before ordering. Support the vehicle safely while it is installed.
What’s included
Compare the package contents with your installation steps before starting.














