Overview
The Rugged Ridge Receiver Hitch Kit, part number 11580.52, is a black rear receiver hitch kit for Jeep vehicles. It includes a 2-inch receiver, a wiring harness and a Jeep hitch plug. No model years are named, so confirm the fit for your Jeep before choosing this kit.
The hitch bolts directly to the factory mounting points at the rear of the vehicle and has a cutout for the factory wiring harness. It is a one-piece welded assembly with a powdercoat finish that sheds water.
Key features
- Bolts directly to factory mounting points at the rear
- Cutout for factory wiring harness mounting
- One-piece welded assembly
- Powdercoat finish that sheds water and provides a long lasting rust free finish
- Includes a 2-inch receiver hitch, wiring harness and Jeep hitch plug
Towing with a Class II receiver
A Class II receiver handles light trailers, bike racks and cargo carriers, and the rating depends on the hitch and the vehicle working together. Towing capacity is limited by the weakest part of the setup, so the vehicle, the hitch and the trailer all need to match. Stay within the lower rating when weight distributing equipment is not in use.
Rust and corrosion are the usual enemies of a bolt-on rear hitch. Check the powdercoat for chips, look over the welds, and touch up bare metal before it spreads. Recheck the mounting bolts after the first few trips, since bolted hitches can settle as the mounting points take load.
- Check the wiring plug before each trip
- Clean the receiver tube so the pin slides freely
- Keep the hitch plug installed when the receiver is empty
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11580.52 |
| UPC | 804314250607 |
| Color | Black |
| Receiver size | 2 in x 2 in |
| Weight class | Class II |
| Finish | Powdercoat |
| Roll pan fit | Does not fit with roll pan |
| Tow rating with weight distributing | 3,500-lb tow rating, 350-lb tongue weight |
| Tow rating otherwise | 2000-lb tow rating, 200-lb tongue weight |
Vehicle fitment
Match the mounting points to your Jeep’s year, model and trim before choosing this kit.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit bolts to factory mounting points, so the cutout must line up with the factory wiring harness. Weight distributing equipment is needed to reach the higher 3,500-lb tow rating. Confirm your load stays within the rating before towing.
What’s included
The kit includes a 2-inch receiver hitch, a wiring harness and a Jeep hitch plug. Weight distributing equipment is not part of the package, so it must be sourced separately for the higher rating.









