Overview
The Warn 31727 is a front receiver that gives a portable winch a frame-mounted attachment point on selected Dodge Ram pickups from 1994 to 2002. It is a frame mount designed for simple installation, and it attaches directly to most vehicle frames.
The fitment covers 1994–2001 Dodge Ram 1500 models and 1994–2002 Dodge Ram 2500 and 3500 models in the trims named under Vehicle fitment. The receiver is a 2-inch unit in the Class III/IV weight class and does not fit with a roll pan.
Key features
- Frame mount design for a portable winch
- Designed for easy installation
- 2 inches x 2 inches receiver size
- Class III/IV weight class
- Does not fit with a roll pan or tow hooks
Frame-mounted winch setup
A front receiver carries a portable winch at the front of the truck, so the load goes into the frame at the mounting points. Before mounting, inspect the frame for cracks, rust or previous repairs around the bolt locations, and make sure the frame is solid enough for the winch’s pull. Frame mounts also depend on clearance, so check that the winch body and cable path clear the bumper and radiator area.
Winches are usually rated for a pull limit that should match the receiver’s weight class and the vehicle’s front end. Using a heavier winch than the receiver is designed for can overload the frame, so match the winch rating to the Class III/IV receiver before use. Use a snatch block or rated recovery strap when the pull is angled, and keep the cable spooled evenly to avoid shock loads.
- Check frame bolt holes for elongation after heavy pulls
- Keep the winch control and cable away from hot components
- Re-torque mounting hardware after the first few uses
Specifications
| Brand | Warn |
|---|---|
| Part number | 31727 |
| UPC | 12748317272 |
| Receiver size | 2 inches x 2 inches |
| Position | Front |
| Weight class | Class III/IV |
| Mount type | Frame mount |
| Roll pan | Does not fit with roll pan |
| Compatibility note | No Sport Package; will not fit with tow hooks |
Vehicle fitment
Covers 1994–2001 Dodge Ram 1500 (Base, LT, Laramie, ST, Sport and WS trims), 1994–2002 Dodge Ram 2500 (Base) and 1994–2002 Dodge Ram 3500 (Base).
Dodge Ram years after 2002 and other makes are not covered. Confirm the trim before installing, since the receiver is not compatible with the Sport package while the 1500 coverage includes the Sport trim. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Warn describes installation as easy, but this is a frame-mounted receiver, so check the frame at the mounting location on your truck before starting. Match the winch’s rating to the Class III/IV receiver weight class before mounting.
What’s included
Check the packed contents before installing.
Not included: a portable winch. The receiver is a mount for one.









