Trailer Connector Kit
Showing 13–24 of 52 resultsSorted by popularity
-
-
-
Trailer Connector Kit
Curt Manufacturing Wiring T-Connectors – 56159
- Fits the 2012–2015 Land Rover Range Rover Evoque (Autobiography, Autobiography Dynamic, Dynamic, Prestige, Pure)
- 4-way flat wiring T-connector, part number CRT56159
- Plugs into the factory harness
- Includes 4-pin connector, dust cap and ground wire
SKU: CRT56159 -
-
Trailer Connector Kit
Curt Manufacturing Wiring T-Connectors – 56127
- Fits the 2011–2018 Mitsubishi Outlander Sport (ES, GT, LE, SE, SEL)
- Battery powered 4-flat wiring T-connector, part number CRT56127
- Plugs directly into the factory harness
- Includes 4-pin connector, dust cap and ground wire with self-tapping screw
SKU: CRT56127 -
Trailer Connector Kit
Curt Manufacturing Wiring T-Connectors – 56121
- Made for the 2011-2013 Lincoln MKX, Base trim
- Curt Manufacturing standard 2-wire wiring T-connector, part number CRT56121
- Plugs into the factory harness with a 4 pin connector
- Ground wire with self-tapping screw and dust cap
- Install time listed at 45 min
SKU: CRT56121 -
-
-
Trailer Connector Kit
Curt Manufacturing Wiring T-Connectors – 56109
- Curt Manufacturing 56109 standard 2-wire wiring T-connector, CRT56109
- Fits 2010 and 2012–2018 Dodge Journey, several trims
- 4-way flat socket for tail lights, brake lights and turn signals
- Dust cover included; install time 15 min
SKU: CRT56109 -
Trailer Connector Kit
Curt Manufacturing Wiring T-Connectors – 56074
- Fits INFINITI FX35 (Base) 2009–2012, FX37 (Base) 2013 and FX50 (Base) 2009–2013
- 4-way flat socket for tail lights, brake lights and turn signals
- Standard 2-wire system with a 30 min. install time
- Dust cover included
- Part number CRT56074 from Curt Manufacturing
SKU: CRT56074 -
Trailer Connector Kit
Curt Manufacturing Wiring T-Connectors – 56045
- Direct fit for the 2005–2014 Volvo XC90 in 2.5T through V8 Sport trims
- 4-way flat socket plugs into the tail light assembly with no splicing needed
- Powered 3-wire to 2-wire tail light converter included
- Dust cover included to keep the connector clean when not in use
- Install time 20 min.; made in USA with a limited one-year warranty
SKU: CRT56045 -
Trailer Connector Kit
Curt Manufacturing Wiring T-Connectors – 56040
- Curt Manufacturing Wiring T-Connectors, part number CRT56040
- Plugs directly into the factory harness
- Includes a 4 pin connector, dust cap and ground wire with self tapping screw
- Universal fit, not tied to particular vehicles
SKU: CRT56040
What a trailer connector kit does
A trailer connector kit carries tail, brake and turn signal circuits from the vehicle to the trailer plug. Vehicle-specific T-connector harnesses tap into the factory tail light wiring through plugs that match the original connectors, so you usually do not cut or splice the vehicle wiring. They end in a standard connector at the hitch.
Common connector types
Learn the plug your trailer uses before choosing a kit.
- 4-way flat is the common light-duty plug carrying tail, brake and left and right turn signals.
- 6-way square adds circuits for functions such as electric brakes or auxiliary power.
- Converter harnesses, listed as 3-wire systems, change a vehicle with combined brake and turn lights to the separate circuits that a trailer expects.
- OEM replacement tow package harnesses restore a factory-style plug on a vehicle that came with a tow package.
Choosing the right kit
Check whether your vehicle has a 2-wire or 3-wire system, which describes how the tail lamps combine brake and turn functions. Confirm whether the vehicle was built with the factory tow package, because kits are listed as with or without it. Install time on the sample listings runs from about 5 to 45 minutes, which gives a rough idea of how involved each wiring harness is.
Look at the harness length, the type of plug at the end, and whether additional parts such as a mounting bracket are included. Always verify the exact year, make, model and trim on the product page and in the manufacturer's application guide.
Installation and testing
Disconnect the battery if the instructions call for it, secure the harness away from heat and moving parts, and use dielectric grease on connections to resist corrosion. Mount the connector so it does not drag on the ground or bind during articulation.
After installation, test every circuit with the trailer or a test light: tail lights, brake lights and both turn signals. Some vehicles with sensitive lighting systems need a converter or a powered module, so follow the kit's instructions. Remember that electric brake trailers also require a brake controller, which is separate.
Wiring, grounding and troubleshooting
Most trailer lighting problems trace back to a poor ground or a corroded connection rather than a faulty harness. The white ground wire should attach to clean bare metal on the vehicle frame or body, and the trailer needs its own solid ground to its frame. Check both ends before assuming a bulb or wire has failed.
- Use a test light or multimeter at the connector to confirm each circuit on the vehicle side
- Look for green corrosion or bent pins inside the plug, and clean with electrical contact cleaner
- Avoid tapping wires in a way that exposes copper, and use heat-shrink or sealed connectors outdoors
- Secure the harness with ties away from the exhaust and moving suspension parts
- Leave enough slack for the hitch to articulate through full turns
If the trailer lights flicker or work only when you wiggle the plug, suspect the plug, the ground or a damaged wire. Many vehicles also protect their tail light circuits with a fuse, and a blown trailer-circuit fuse is a quick thing to check. When adding to a vehicle with advanced electronics, follow the manufacturer's wiring instructions so the body control system is not overloaded.
Popular Trailer Connector Kit brands
Trailer Connector Kit FAQ
What is the difference between 4-way and 6-way connectors?
A 4-way flat carries tail, brake and turn signals. A 6-way square includes the same plus circuits for functions like electric brakes or auxiliary power, so choose what your trailer needs.
Will a T-connector harness require cutting wires?
Vehicle-specific T-connectors usually plug into factory tail light connectors, so no cutting is required. Universal kits and some older vehicles may need splicing, so check the instructions.
Do I need a converter for my vehicle?
If your vehicle shares brake and turn signals on one filament, a converter is needed to separate them for the trailer. Check your vehicle's wiring type and the listing's notes.
Does this kit power trailer brakes?
A connector kit supplies lighting circuits. Electric trailer brakes need a brake controller and the proper wiring, which is a separate component from a trailer light connector.











