Overview
The Curt Manufacturing CRT56027 is a custom 4-way flat wiring harness for certain years of the Buick Enclave and Chevrolet Traverse. The manufacturer fitment list covers the 2008–2012 Buick Enclave and the 2010–2012 Chevrolet Traverse. The harness plugs into the vehicle’s taillight assembly and provides a standard 4-way flat trailer connector, so trailer tail lights, brake lights and turn signals can be powered without cutting or splicing.
The Chevrolet Malibu is not confirmed for this harness, so do not assume it fits a Malibu. Check the trim carefully before installing, because the LTZ trim of the 2010–2012 Chevrolet Traverse needs to be verified against your vehicle.
Key features
- Plug-and-play connection to the taillight assembly with no cutting or splicing
- OEM-compatible connectors designed to tap into the taillight assembly
- Standard 4-way flat output for tail lights, brake lights and turn signals
- Rubber dust cover keeps connection points clean and protected when not in use
- CURT Easy-Mount connector bracket with powder-coated steel construction
- Bracket mounts to the trailer hitch receiver tube with no drilling required
Keeping taillight connections reliable
Taillight harnesses sit in a harsh spot, with road spray, heat and vibration reaching the connectors. Over time the plastic can become brittle and the contacts can loosen, which leads to dim lights or lights that work only some of the time. Checking the connection at each trailer hookup helps catch problems early.
When choosing a harness, consider how the trailer’s lighting is wired. A standard 4-way flat output carries the tail, brake and turn circuits, so trailers with extra functions may need a separate wiring solution. Also think about how the bracket will be mounted, since a stable mount keeps the connector from pulling on the wiring.
Before a long trip, look at the connection points, wipe away grit and make sure the dust cover is seated. Replace the harness if the insulation cracks, the connector housing discolors or the contacts show green corrosion.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT56027 |
| Vehicle application | Buick Enclave 2008–2012; Chevrolet Traverse 2010–2012 (see fitment) |
| Connector output | 4-way flat |
| Dust cover | Rubber |
| Mounting bracket | CURT Easy-Mount connector bracket, powder-coated steel |
| Warranty | Limited one-year |
Vehicle fitment
This harness is vehicle-specific. It fits the 2008–2012 Buick Enclave in the Base, CX and CXL trims, and the 2010–2012 Chevrolet Traverse in the LS, LT and LTZ trims. Both are direct fits.
Other Enclave and Traverse years and other GM models are not covered, and the Malibu is not confirmed for this harness. Confirm your vehicle’s year, model and trim before ordering, paying close attention to the LTZ trim.
Installation notes
The connectors plug into the taillight assembly, so no cutting or splicing is needed. The CURT Easy-Mount bracket fastens to the trailer hitch receiver tube without drilling, and it can carry the connector when the harness is not in use.
What’s included
The harness includes a rubber dust cover for the connection points. Check the package contents against your installation before starting, including whether the CURT Easy-Mount bracket is in the box.









