Overview
The Curt Manufacturing CRT55597 is a powered wiring T-connector converter for the 2004-2009 Dodge Durango and the 2007-2009 Chrysler Aspen. It is built for a 3-wire system and plugs into the factory harness.
It is a direct fit for the Aspen Limited and Limited Hybrid, and for Durango Adventurer, Limited, Limited Hybrid, SE, SLT, ST and SXT trims. The install time is 25 min.
Key features
- Powered converter for a 3-wire system
- Plugs into the factory harness
- Four-pin connector, dust cap and ground wire with self-tapping screw
- Covers the Aspen and Durango entries in the manufacturer list
Before connecting a converter
A converter like this one lets a trailer’s lighting work with a vehicle’s factory tow wiring when the two systems differ. Matching the 3-wire system to your trailer is the first step, and checking that the vehicle’s trim is in the covered range prevents wasted returns. Mismatched wiring can cause lights to behave oddly even when the connection looks solid.
On the Durango and Aspen, the factory harness sits in a spot that can collect road spray and grit. Before fitting the connector, inspect the harness for cracked insulation or corroded terminals, and clean any contact surfaces. Fit the dust cap whenever the connector is unplugged.
Ground connections cause more lighting faults than most people expect. Choose a clean, bare metal point for the self-tapping screw, and avoid areas with paint or rust. After installation, test every light, including brakes and turn signals, and recheck the ground after the first few trips.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT55597 |
| Type | Powered wiring T-connector converter |
| Wiring system | 3-wire system |
| Install time | 25 min |
| Included | 4 pin connector, dust cap, ground wire with self-tapping screw |
Vehicle fitment
It fits the 2007-2009 Chrysler Aspen in Limited and Limited Hybrid trims and the 2004-2009 Dodge Durango in Adventurer, Limited, Limited Hybrid, SE, SLT, ST and SXT trims. It is a direct fit.
Other Chrysler and Dodge models, and other years of these two vehicles, are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
It plugs in at the factory harness, and the ground lead attaches with a self-tapping screw. Listed install time is 25 min.
What’s included
Four-pin connector, dust cap and ground wire with a self-tapping screw.









