Overview
The Curt Manufacturing 56420 is a custom wiring connector that gives Hyundai Palisade, Hyundai Santa Fe, Hyundai Tucson and Kia Telluride owners a standard 4-way flat trailer socket. It plugs into the vehicle’s existing OEM socket, so no cutting or splicing is needed, and it requires the factory (OEM) tow package.
Once connected, it powers a trailer’s taillights, brake lights and turn signals. A tail light converter is included for vehicle-trailer compatibility. The vehicles it fits are covered in the Vehicle fitment section below.
Key features
- Plugs into the existing OEM vehicle socket to create a 4-way flat output
- Plug-and-play design, with no cutting or splicing
- 4-way flat output for tail lights, brake lights and turn signals
- Tail light converter for vehicle-trailer compatibility
- SMT circuitry, which CURT says improves performance and durability
- Rubber dust cover keeps the connection points clean when unplugged
- Mounts to the trailer hitch receiver tube with a CURT Easy-Mount connector bracket, no drilling required
Understanding OEM tow wiring
An OEM tow package is factory wiring already run to the rear of the vehicle, usually with a socket near the hitch and circuits for the trailer’s lights. Aftermarket connectors like this one work by plugging into that existing socket rather than tapping the wires. That approach keeps the factory harness intact, but it depends on the tow package being there in the first place.
Before buying, confirm the vehicle’s trailer wiring is complete and that the socket has no bent pins or moisture inside. If a trailer’s lights flicker or fail when the tow connector is installed, check the trailer plug, the connector seating and any converter connection before assuming a wiring fault elsewhere.
Hybrid and plug-in hybrid models can have different rear electrical layouts, so check that the connector matches the trim you own. Keep the dust cover on when the socket is unplugged, and recheck the mounting bracket after the first few tows. Loose brackets can flex and strain the connection over time.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT56420 |
| Trailer output | 4-way flat |
| Vehicle connection | Plugs into the OEM vehicle socket |
| Circuitry | SMT circuitry |
| Mounting bracket | CURT Easy-Mount connector bracket, powder-coated steel, no drilling |
| Installation requirement | Factory (OEM) tow package |
| Warranty | Limited one-year |
Vehicle fitment
It fits the 2019–2021 Hyundai Santa Fe in Calligraphy, Hybrid Blue, Hybrid Limited, Hybrid SEL Premium, Limited, SE, SEL, SEL Plus and Ultimate trims; the 2020–2021 Hyundai Palisade in Calligraphy, Limited, SE and SEL trims; the 2022 Hyundai Tucson in Blue Hybrid, Limited, Limited Hybrid, Limited Plug-In Hybrid, N Line, SE, SEL, SEL Convenience Hybrid and SEL Plug-In Hybrid trims; and the 2020–2021 Kia Telluride in EX, LX, S and SX trims.
Santa Fe years outside 2019–2021, Palisade years outside 2020–2021 and Telluride years outside 2020–2021 are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the connector plugs into the OEM socket, the vehicle must already have the factory tow package wiring before installation. The Easy-Mount bracket mounts on the hitch receiver tube with no drilling, and the dust cover should go back on whenever the connector is unplugged.
What’s included
The connector includes a 4-way flat output, a tail light converter for vehicle-trailer compatibility and a rubber dust cover.
Not included: Check the package contents against your installation before starting, including whether the CURT Easy-Mount connector bracket is in the box. The factory (OEM) tow package must already be on the vehicle.












