Overview
The Curt Manufacturing 55312 is a standard 2-wire wiring T-connector for Chevrolet and GMC trucks from 1985 to 1997. It plugs directly into the factory harness, which is the connection method Curt describes for this part.
It fits Chevrolet and GMC full-size pickups and Suburbans, the Chevrolet S10 and GMC Sonoma and S15 compacts, the GMC Jimmy, the GMC Syclone and the 1996–1997 Isuzu Hombre.
Key features
- Standard 2-wire system
- Plugs directly into the factory harness
- 4 pin connector included
- Dust cap and ground wire with self tapping screw included
Factory harness and aging trucks
Trucks from this era have had many years of road salt, moisture and temperature swings working on their wiring. The factory harness plugs can corrode quietly, and a T-connector is only as reliable as the pins it meets. A quick look at the contacts before installation can prevent an intermittent light problem that is difficult to trace later.
Grounding is the other common weak point. The ground wire needs to bond to bare metal, so paint, grease or rust at the contact spot should be removed first. Tighten the screw firmly and make sure the ground stays put when the wiring is flexed. A good ground often solves dim or erratic trailer lights that seemed to come from the connector itself.
- Check factory pins for green residue
- Scrape the ground point to bare metal
- Tighten the self tapping screw firmly
- Recheck connections after rough roads
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT55312 |
| Wiring system | Standard 2-wire |
| Connector | 4 pin |
| Install time | 5 min. |
| Fitment type | Direct fit |
Vehicle fitment
Curt’s manufacturer fitment list covers the 1985–1986 Chevrolet C10, K10, C20, K20, C30 and K30 and their Suburban versions, the 1987–1991 Chevrolet Blazer, the 1985–1991 GMC Jimmy, the 1985–1997 Chevrolet S10, the 1991–1997 GMC Sonoma and the 1996–1997 Isuzu Hombre, among other Chevrolet and GMC truck entries from 1985 to 1997.
Years and models outside this list, including Ford vehicles, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The install time is 5 min. Plug the connector into the factory harness, then secure the ground wire with the included self tapping screw.
What’s included
A 4 pin connector, a dust cap, and a ground wire with a self tapping screw.









