Overview
The CURT 55325 is a wiring T-connector with a converter for the 3-wire system. It fits the 1993–1999 Ford Ranger and selected Mazda B2300, B3000 and B4000 pickups from 1994 to 2008. It plugs direct into the factory harness, so trailer lighting connects through the vehicle’s existing plugs.
Key features
- Converter included for the 3-wire system
- Plugs direct into the factory harness
- 4-pin connector
- Dust cap included
- Ground wire with self-tapping screw
Tow vehicle wiring and converters
A 3-wire trailer system carries the tail, brake and turn functions on separate conductors, while many vehicles feed trailers with a different layout. A converter bridges that gap so the trailer’s lights respond correctly to the tow vehicle. Because the converter sits between the factory harness and the trailer, a mismatch shows up as lights that do not respond as expected.
Pickups that have been towing for years often need a closer look at the factory plugs. Check for loose terminals, corrosion and brittle insulation near the taillight area. The ground wire should be tight and clean, since a weak ground can mimic a converter problem and send you chasing the wrong part.
- Confirm the trailer uses a 3-wire system
- Check factory plugs for corrosion
- Keep the converter dry and secured
- Test ground connection before troubleshooting
Specifications
| Brand | CURT Manufacturing |
|---|---|
| Part number | CRT55325 |
| Wiring system | 3-wire with converter |
| Connector | 4-pin |
| Included hardware | Dust cap, ground wire and self-tapping screw |
| Install time | 5 min. |
Vehicle fitment
It fits the 1993–1999 Ford Ranger in EV, STX, Splash, Sport, XL, XL Sport and XLT trims, and Mazda B2300 (1994–1997 and 2001–2008), B3000 (1994–1996 and 1998–2007) and B4000 (1994–2008) pickups.
Ford Ranger years from 2000 onward and Mazda B-Series years outside the ranges above are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Connect the T-connector to the factory harness, then attach the ground wire with the self-tapping screw provided. The dust cap protects the connector between uses.
What’s included
T-connector with converter, 4-pin connector, dust cap, ground wire and self-tapping screw.
Not included: trailer wiring.









