Overview
The Curt Manufacturing 56042 is a replacement OEM tow package wiring harness with a 4-flat plug for the 2008–2019 Toyota Highlander. It plugs into the vehicle’s existing socket to provide a standard 4-way flat trailer socket, so the trailer’s taillights, brake lights and turn signals can be powered from the tow package wiring.
The harness uses a standard 2-wire system and is made in USA. The install time is 20 minutes. Highlander trims covered by this harness appear in the Vehicle fitment section below.
Key features
- Replacement OEM tow package wiring harness with 4-flat output
- Plug-and-play design; splicing is not needed
- 4-way flat output connects tail lights, brake lights and turn signals
- Standard 2-wire system
- Dust cover included to keep the connector clean when not in use
- Made in USA, with a limited one-year warranty
Installing a tow harness
A replacement harness is usually chosen when the original tow wiring has failed or been damaged by moisture, rodents or past modifications. Because this one plugs into the existing socket, the factory wiring stays in place. The job is mostly about confirming the old connector is worn out and the new one seats correctly.
Start by testing the trailer lights with the old harness connected so you have a baseline. Then compare the new plug’s pin layout with the socket before fitting it. Work on a dry day, keep the connector out of standing water, and fit the dust cover when you are finished.
Once installed, check each light by hand, including the brake and turn signals, and recheck after the first few trips. Any flicker or dim output points to a connection that needs attention. Keep the old harness until the new one is confirmed working.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT56042 |
| Type | Replacement OEM tow package wiring harness |
| Output | 4-flat (4-way flat) |
| Wiring system | Standard 2-wire |
| Install time | 20 minutes |
| Origin | Made in USA |
| Warranty | Limited one-year |
Vehicle fitment
It fits the 2008–2019 Toyota Highlander in Base, Hybrid, Hybrid LE, Hybrid Limited, Hybrid XLE, LE, LE Plus, Limited, Plus, SE, Sport and XLE trims.
Highlander model years after 2019 and years before 2008 are not on the list, and other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Replacement harness with 4-flat plug and a dust cover. No other included hardware is described.









