Overview
The Curt Manufacturing 55350 is a standard 2-wire wiring T-connector for the 1992–1996 Ford Bronco. It plugs directly into the factory harness and includes a 4 pin connector, a dust cap and a ground wire with a self tapping screw.
It fits the 1992–1996 Ford Bronco in Custom, Eddie Bauer, XL, XLT, XLT Lariat, XLT Nite and XLT Sport trims. Install time is 5 min.
Key features
- Standard 2-wire system
- Plugs directly into the factory harness
- 4 pin connector with dust cap
- Ground wire with self tapping screw included
Before you install
A T-connector works by tapping into existing circuits at the vehicle’s factory harness, so the job comes down to making clean, secure connections. Before starting, disconnect the battery and confirm which circuit each wire serves. Inspect the harness plug for bent pins, corrosion or brittle insulation, since a weak connection at this point can cause dim or intermittent lights.
The ground wire needs a solid path to bare metal. Clean paint and rust from the mounting point, fasten the self tapping screw firmly, and avoid bracket areas that flex. A poor ground is one of the most common reasons a T-connector seems to fail.
- Keep the dust cap installed when the port is unused
- Route the wire away from moving parts and hot exhaust components
- Re-check the screw after the first few drives
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT55350 |
| Wiring system | Standard 2-wire |
| Connector | 4 pin |
| Install time | 5 min. |
| Fitment type | Direct fit |
| Included | Dust cap, ground wire with self tapping screw |
Vehicle fitment
Curt’s manufacturer fitment list covers the 1992–1996 Ford Bronco only, in Custom, Eddie Bauer, XL, XLT, XLT Lariat, XLT Nite and XLT Sport trims.
Other Bronco years and other Ford models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plug the connector into the factory harness, then fasten the ground wire with the included self tapping screw.
What’s included
A 4 pin connector, a dust cap, and a ground wire with a self tapping screw.









