Overview
The CURT 55344 is a standard 2-wire wiring T-connector for 1997–2004 Ford and Lincoln sport utility vehicles and trucks. It fits Ford Expedition, Explorer, Explorer Sport, Explorer Sport Trac, F-150 and Ranger models, plus the Lincoln Aviator, Lincoln Navigator and Mercury Mountaineer.
It plugs direct into the factory harness and includes a 4-pin connector, a dust cap and a ground wire with self-tapping screw. The listed install time is 10 minutes.
Key features
- Standard 2-wire system
- Plugs direct into the factory harness
- 4-pin connector included
- Dust cap included
- Ground wire with self-tapping screw
Working with older Ford wiring
Ford sport utilities and pickups from this period share a similar rear wiring layout, which is why one standard T-connector covers many models. Even so, each truck has its own harness routing and plug condition, and the first step is always to confirm the connector pins and the rear lighting circuits before attaching anything. A sound starting point saves time when troubleshooting later.
The ground connection deserves as much attention as the plug. A grounding point covered in paint or road grime can cause dim lamps or signals that do not match the tow vehicle. Clean the surface, fasten the self-tapping screw firmly and keep the connector covered when the trailer is unhitched so moisture does not reach the contacts.
- Confirm the pins and rear circuits first
- Clean the ground point to bare metal
- Keep the dust cap on when unhitched
- Recheck the lights after the first trip
Specifications
| Brand | CURT Manufacturing |
|---|---|
| Part number | CRT55344 |
| Wiring system | Standard 2-wire |
| Connector | 4-pin |
| Included hardware | Dust cap, ground wire and self-tapping screw |
| Install time | 10 min. |
Vehicle fitment
It fits 1997–2003 Ford Expedition (Eddie Bauer, XLT), 2002–2003 Ford Explorer, 2001–2003 Ford Explorer Sport and Sport Trac, 1997–2003 Ford F-150 and the 2004 F-150 Heritage, 2000–2003 Ford Ranger, 2003–2004 Lincoln Aviator, 1998–2003 Lincoln Navigator and 2002–2003 Mercury Mountaineer.
Model years outside the ranges above are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Plug the connector into the factory harness and fasten the ground wire with the self-tapping screw. The listed install time is 10 minutes.
What’s included
T-connector with 4-pin connector, dust cap, ground wire and self-tapping screw.









