Overview
The Curt Manufacturing wiring T-connector 55384 (part number CRT55384) is a 2-wire trailer wiring connector for 2013–2019 GM, Ford, Ram, Toyota and Jeep trucks and SUVs. It plugs direct into the factory harness and includes a 4 pin connector for trailer wiring.
The manufacturer list names 2013 through 2019 models from Audi, Buick, Cadillac, Chevrolet, Dodge, Ford, GMC, Honda, INFINITI, Jeep, Lincoln, Nissan, Ram and Toyota. Examples include the Chevrolet Silverado 1500, Ford F-150, GMC Sierra 1500, Ram 1500 and Toyota Tundra. Each entry lists specific trims, which are shown in the fitment section.
Key features
- 2-wire trailer wiring system
- Connects directly to the factory harness
- 4 pin connector for the trailer
- Dust cap for the connector
- Ground wire secured by a self tapping screw
Choosing a T-connector
A T-connector gives a trailer a single plug point by tapping into the vehicle’s factory wiring. Before buying one, match the wiring system to your trailer. A 2-wire design suits trailers that need only the basic lights, while a trailer with more circuits may require a different setup. Check the trailer’s plug type as well.
Because the ground wire fastens with a self-tapping screw, choose a clean, bare metal spot on the body or bracket. Paint or rust under the screw head can cause weak grounding and dim lights. Use the dust cap any time the connector is unplugged to keep moisture and grit out of the contacts.
Most T-connector failures trace back to corrosion at the terminals or a loose ground. Inspect the connector every few months, especially after wet weather, and replace any cracked housing or damaged pins right away.
Specifications
| Brand | Curt Manufacturing |
|---|---|
| Part number | CRT55384 |
| Wiring system | 2-wire |
| Connector | 4 pin |
| Included parts | Dust cap, ground wire with self tapping screw |
| Install time | 5 to 20 min |
Vehicle fitment
Fits 2013 through 2019 model years from Audi, Buick, Cadillac, Chevrolet, Dodge, Ford, GMC, Honda, INFINITI, Jeep, Lincoln, Nissan, Ram and Toyota, including the 2017 Audi Q7, Buick Enclave, Cadillac Escalade and XT5, Chevrolet Tahoe and Traverse, Dodge Durango, Ford Expedition and Explorer, GMC Yukon and Acadia, Honda Pilot and Ridgeline, INFINITI QX60 and QX80, Jeep Cherokee and Grand Cherokee, Lincoln Navigator, Nissan Frontier and Titan, Ram 1500 through 3500, and Toyota 4Runner, Sequoia, Tacoma and Tundra.
This connector is for 2013 through 2019 models. Model years before 2013 and after 2019 are not covered. The Ford Ranger and Jeep Wrangler are not among the covered models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The listed install time is 5 to 20 min. The connector plugs into the factory harness, and the ground wire is fastened with a self tapping screw.
What’s included
The kit contains a 4 pin connector, dust cap and ground wire with self tapping screw.









