Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 757–768 of 3453 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
Bilstein 5100 Series Shock Absorber – 24-233354
- Rear ride height adjustable shock for 2019–2026 Ram 1500 without air suspension
- Rear lift of 0 to 1 in, or 0 to 2 in on trucks without the factory Off-Road Package
- Collapsed length 15.89 in, extended length 25.43 in
- 46mm zinc-plated smooth body
SKU: BIL24-233354 -
Shock Absorbers & Shock Accessories
Bilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-294218
Shock Absorbers & Shock AccessoriesBilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-294218
- Front ride height adjustable shock for 2019–2023 Ford Ranger
- Up to 2.5 in front lift with OE springs
- Collapsed length 14.59 in, extended length 19.26 in
- 46mm zinc-plated snap-ring grooved body, sold individually
SKU: BIL24-294218 -
Shock Absorbers & Shock Accessories
Bilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-286503
Shock Absorbers & Shock AccessoriesBilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-286503
- Front ride height adjustable shock for 2014 Ford F-150, 2WD models only
- Up to 2.1 in of front lift
- Collapsed length 16.05 in, extended length 21.4 in, travel 5.35 in
- Zinc-plated 46mm snap-ring grooved body
SKU: BIL24-286503 -
Shock Absorbers & Shock Accessories
Bilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-285063
Shock Absorbers & Shock AccessoriesBilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-285063
- Rear ride height adjustable shock for 2014–2024 Ford Expedition and 2014–2019 Lincoln Navigator
- Rear lift height 0 to 1.5 in
- For vehicles without load leveling suspension
- Collapsed length 15.00 in, extended length 20.95 in, travel 5.95 in
SKU: BIL24-285063 -
Shock Absorbers & Shock Accessories
Bilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-285056
Shock Absorbers & Shock AccessoriesBilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-285056
- Front ride height adjustable shock for 2014–2024 Ford Expedition and 2014–2019 Lincoln Navigator
- Up to 1 in of front lift for this unit
- Not for vehicles with electronic controlled suspension
- Collapsed length 16.10 in, extended length 20.95 in
SKU: BIL24-285056 -
Shock Absorbers & Shock Accessories
Bilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-268189
Shock Absorbers & Shock AccessoriesBilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-268189
- Front ride height adjustable shock for 2017–2024 Nissan Titan
- Up to 2.2 in of front lift with a snap-ring grooved coilover body
- Collapsed length 10.94 in, extended length 15.31 in, travel 4.37 in
- No reservoir; zinc-plated 46mm body
SKU: BIL24-268189 -
Shock Absorbers & Shock Accessories
Bilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-186698
Shock Absorbers & Shock AccessoriesBilstein 5100 Series Ride Height Adjustable Shock Absorber – 24-186698
- Front ride height adjustable shock for trucks and SUVs with OE coilover-style front suspension
- Corrects factory nose-down rake and supports up to 2.75 in of front lift with OE springs
- Collapsed length 15.37 in, extended length 20.83 in
- Fits 2004–2008 Ford F-150 and 2006–2008 Lincoln Mark LT
SKU: BIL24-186698 -
Shock Absorbers & Shock Accessories
Bilstein 5100 Series Front Shock Absorber – 24-315067
- Front shock for 2020–2026 Jeep Gladiator
- Built for lifted trucks with a 3 to 4.5 in front lift
- 46mm zinc-plated smooth body with eyelet mounts
- Collapsed length 18.52 in and extended length 28.76 in
SKU: BIL24-315067 -
Shock Absorbers & Shock Accessories
Bilstein 5100 Series Front Shock Absorber – 24-225434
- Front shock for 2011–2015 Dodge Durango and 2011–2015 Jeep Grand Cherokee (WK)
- Ride height adjustable: 0 to 2.5 in front lift
- 46mm smooth body with a 14mm stem and zinc plating
- Collapsed length 26.28 in and extended length 32.09 in
SKU: BIL24-225434 -
Shock Absorbers & Shock Accessories
Bilstein 5100 Ride Height Adjustable Shock Absorber – 24-292702
- Front shock for 2015–2022 Chevrolet Colorado and GMC Canyon
- Ride height adjustable, 0 to 2.6 in front lift height
- 46mm zinc-plated, snap-ring grooved monotube body
- Collapsed length 14.76 in and extended length 19.45 in
SKU: BIL24-292702 -
Shock Absorbers & Shock Accessories
Bilstein 5100 (Ride Height Adjustable) Series Shock Absorber – 24-282642
Shock Absorbers & Shock AccessoriesBilstein 5100 (Ride Height Adjustable) Series Shock Absorber – 24-282642
- Front shock for 2002–2007 Jeep Liberty (KJ) and 2008–2012 Liberty (KK)
- Ride height adjustable: 1 to 2.5 in front lift with OE springs
- 46mm monotube, gas-pressure body with snap ring grooves
- Coil spring not included
SKU: BIL24-282642 -
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.








