Overview
The Rancho RS5208 is a rear gas-charged RS5000 Series shock absorber for the 1996–1997 Lexus LX450 (Base) and the 1990–1997 Toyota Land Cruiser (Base). It has a w/0 in. Lift/Drop rating and is a direct fit.
Each unit is one rear shock with ten-stage velocity sensitive valving, a 5/8-in. (16mm) piston rod and a 1 3/8-in. (35mm) piston. A red protective boot comes with it. The RS5000 Series carries a limited lifetime warranty and suits both stock and raised trucks.
Key features
- Rear-position, gas-charged construction
- Ten-stage velocity sensitive valving
- Piston rod measures 5/8-in. (16mm) across
- Piston measures 1 3/8-in. (35mm) across
- Red protective boot included
- Lift rating of w/0 in. Lift/Drop
Rear shock service and wear
A rear shock controls how the axle moves after a bump, so it affects control on pavement as much as on the trail. When a shock is worn, the body can keep bouncing after a dip and the rear may feel loose on highway sweeps. Inspect the unit for oil seeping around the shaft, dents in the body and a torn boot that lets grit reach the rod.
Gas-charged designs keep the internal oil under pressure to resist foaming during hard use. Replacing only one rear unit can leave the axle with uneven damping, so many owners replace both sides together. While the rear is apart, check the bushings and mounting hardware, since a tired bushing can make a new shock feel noisy.
- Look for oil on the shock body
- Check the boot for tears or missing sections
- Bounce each rear corner and count the rebounds
- Inspect bushings during service
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5208 |
| UPC | 10039703520802 |
| Series | RS5000 Series |
| Position | Rear |
| Fitment type | Direct Fit |
| Hydraulic / gas charged | Gas charged |
| Valving | Ten-stage velocity sensitive |
| Piston rod diameter | 5/8-in. (16mm) |
| Piston diameter | 1 3/8-in. (35mm) |
| Lift rating | w/0 in. Lift/Drop |
| Boot | Red protective boot, included |
| Sold as | Each |
| Warranty | Limited lifetime (Rancho) |
Vehicle fitment
The manufacturer fitment list covers these vehicles for the RS5208:
- 1996–1997 Lexus LX450 (Base)
- 1990–1997 Toyota Land Cruiser (Base)
LX450 years outside 1996–1997, Land Cruiser years outside 1990–1997, and other Lexus or Toyota models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One RS5208 rear shock absorber, sold as each, with a red protective boot included.









