Select your vehicle

Rancho RS5000 Series Shock Absorber – RS5284

Rancho

Shop Dodge Nitro Shock Absorbers on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS5284, a rear gas-charged shock absorber from the RS5000 Series
  • Fits 2007-2011 Dodge Nitro and 2002-2012 Jeep Liberty KJ and KK
  • No lift (0 in. Lift/Drop)
  • Twin tube cellular gas design and limited lifetime warranty

Description

Overview

The Rancho RS5284 is a rear RS5000 Series gas-charged shock absorber for the 2007 to 2011 Dodge Nitro and the Jeep Liberty KJ (2002 to 2007) and KK (2008 to 2012). It is for vehicles with no lift.

The RS5284 has a twin tube cellular gas design and ten-stage velocity sensitive valving. Its rods are 5/8-in. (16 mm) and 1/2-in. (12 mm), with a nitro-carburized coating in place of chrome, and most applications use a 1-3/8 inch piston.

Key features

  • Rear position for Dodge Nitro and Jeep Liberty applications
  • Twin tube cellular gas design
  • Ten-stage velocity sensitive valving
  • Nitro-carburized rod coating in place of chrome
  • Limited lifetime warranty

Rod coatings and gas charge

The rod is the part of the shock that slides through the seal on every stroke, so its surface matters. A nitro-carburized coating is a different surface treatment from chrome, and it changes how the rod handles wear and debris. Twin tube designs with a cellular gas charge are common on light SUV shocks, where steady damping matters on pavement and gravel.

When replacing a shock on a Nitro or Liberty, keep the year, model and trim in mind, then inspect the mount bushings before installing. Check the bump stops and boots for cracks, because debris that gets past a damaged boot can wear the seal faster. Shocks are usually replaced as a pair on the same axle so the vehicle handles evenly.

  • Look for scoring or pitting on the rod
  • Check the seal area for oil around the body
  • Replace torn boots before debris reaches the rod

Specifications

Brand Rancho
Series RS5000 Series
Part number RS5284
UPC 39703528405
Position Rear
Lift No lift (0 in. Lift/Drop)
Design Twin tube cellular gas
Valving Ten-stage velocity sensitive
Rod diameter 5/8-in. (16 mm) and 1/2-in. (12 mm)
Rod finish Changes from chrome to nitro-carburized coating
Piston 1-3/8 inch (on most applications)
Warranty Limited lifetime
Charge type Gas

Vehicle fitment

It is a direct-fit rear shock for these vehicles:

  • 2007-2011 Dodge Nitro (Detonator, Heat, R/T, SE, SLT, SXT, Shock)
  • 2002-2007 Jeep Liberty (KJ) (65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport)
  • 2008-2012 Jeep Liberty (KK) (Jet, Limited, Renegade, Sport)

Jeep Liberty years outside 2002 to 2012, and Jeep Cherokee and Grand Cherokee models, are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

One rear shock absorber.

Not included: Check your mounting hardware against the installation before starting.

SKU: RANRS5284 Category:

Specification

Shipping weight 5.70 lbs
Package dimensions 24.10 × 3.30 × 3.30 in
brands

Fitment

VehicleYearsTrims
Dodge Nitro2007–2011Detonator, Heat, R/T, SE, SLT, SXT, Shock
Jeep Liberty (KJ)2002–200765th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport
Jeep Liberty (KK)2008–2012Jet, Limited, Renegade, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the RS5284 fit a 2005 Jeep Liberty?

Yes. The 2002 to 2007 Jeep Liberty (KJ) is listed, in trims including 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition and Sport, so a 2005 KJ falls in range. Confirm your vehicle's year, model and trim before ordering.

Is the RS5284 for a lifted vehicle?

No. The RS5284 is listed with no lift, shown as 0 in. Lift/Drop, so vehicles with a lift should check for a height-matched shock before installing.

What rod sizes does the RS5284 use?

It uses 5/8-in. (16 mm) and 1/2-in. (12 mm) rods that change from chrome to nitro-carburized coating, plus a 1-3/8 inch piston on most applications. Its part number is RS5284.

Are bump stops usually replaced with the shock?

Not always, but inspect them while the shock is off. Cracked or flattened bump stops can change how the suspension behaves at the end of its travel. Replace worn stops when they are visibly damaged or compressed.

How do I know the rod seal has failed?

Look for oil streaking on the outside of the shock body or a film on the rod near the seal. A shock that feels soft, bouncy or noisy over bumps can also point to seal wear. Replacing the whole shock is the usual fix on light trucks and SUVs.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Dodge Nitro Shock Absorbers on Amazon