Overview
The Rancho RS5244 is a front gas-charged shock from the RS5000 Series, built for light trucks and sport utility vehicles with a 4-inch lift (w/4 in. Lift). It fits 1988 to 1999 Chevrolet and GMC K1500 and K2500 trucks and their Suburban versions, plus select Blazer, Tahoe and Yukon years from 1992 to 2000.
The RS5000 Series has been offered since 1985 as a workhorse design for stock and raised vehicles. The RS5244 combines a 5/8-inch (16mm) piston rod, a 1 3/8-inch (35mm) piston and ten-stage velocity sensitive valving for on-road and off-road use.
Key features
- Front position for the listed Chevrolet and GMC trucks and SUVs
- Gas-charged body with ten-stage velocity sensitive valving
- Designed for a vehicle with a 4-inch lift (w/4 in. Lift)
- 5/8-inch (16mm) piston rod and 1 3/8-inch (35mm) piston
- Red protective boot included
Balancing street and trail use
A front shock on a lifted Chevrolet or GMC truck works across a wider range of motion than on a stock vehicle. Good damping helps control the front on washboard and rutted roads, and it keeps the tires planted during braking. Too stiff a setup can make daily driving feel harsh over expansion joints.
Shock height and spring rate should match how the truck is used. If the vehicle carries heavy loads or pulls a trailer, inspect the springs and bump stops along with the shock, since a sagging spring changes the shock’s working range. Replace mounts and bushings when they feel soft or have play.
- Match shock and spring choices to your use
- Inspect the front bump stops
- Check mounts for play after rough trips
- Keep the boot clean and dry
Specifications
| Brand | Rancho |
|---|---|
| Series | RS5000 Series |
| Part number | RS5244 |
| UPC | 10039703524404 |
| Position | Front |
| Charge type | Gas charged |
| Lift design | 4 in. lift (w/4 in. Lift) |
| Piston rod diameter | 5/8-in. (16mm) |
| Piston diameter | 1 3/8-in. (35mm) |
| Valving | Ten-stage velocity sensitive |
| Boot | Red protective boot |
| Quantity | Each |
| Fitment type | Direct fit |
Vehicle fitment
This is a direct-fit front shock for these vehicles. Trim names vary by model, so confirm the trim for your vehicle.
- 1988-1999 Chevrolet K1500
- 1988-1999 Chevrolet K2500
- 1992-1994 Chevrolet Blazer
- 1995-2000 Chevrolet Tahoe
- 1992-1999 Chevrolet K1500 Suburban
- 1988-1999 GMC K1500
- 1992-1999 GMC K1500 Suburban
- 1988-2000 GMC K2500
- 1992-1999 GMC K2500 Suburban
- 1992-2000 GMC Yukon
Blazer coverage ends after 1994 and Tahoe coverage stops at 2000, and the K-series trucks are not covered after 2000, so later generations are outside this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure your current suspension height against the 4-inch lift figure before fitting, since this shock is designed for a 4-inch lift. Confirm that your existing mounts match the new shock before installing.
What’s included
One shock absorber, front position, with a red protective boot.
Not included: Confirm your existing mounts before installing the new unit.









