Select your vehicle

Rancho RS5000 Series Shock Absorber – RS5259

Rancho

$49.99In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 8:10 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rancho RS5259, a rear twin tube cellular gas shock absorber from the RS5000 Series
  • Fits the 1993-1998 Jeep Grand Cherokee (ZJ)
  • No lift (0 in. Lift/Drop)
  • Ten-stage velocity sensitive valving and limited lifetime warranty

Description

Overview

The Rancho RS5259 is a rear RS5000 Series twin tube cellular gas shock absorber for the 1993 to 1998 Jeep Grand Cherokee (ZJ). It is set for no lift.

The RS5000 line is made for light trucks and sport utility vehicles. This model uses ten-stage velocity sensitive valving, rods of 5/8-in. (16 mm) and 1/2-in. (12 mm) with a nitro-carburized coating in place of chrome, and a 1-3/8 inch piston on most applications.

Key features

  • Twin tube cellular gas design
  • Ten-stage velocity sensitive valving
  • 5/8-in. (16 mm) and 1/2-in. (12 mm) rods with nitro-carburized coating in place of chrome
  • 1-3/8 inch piston on most applications
  • Limited lifetime warranty

Twin tube shock behavior

A twin tube gas shock uses an inner and outer tube with gas charged in the reservoir, which helps keep the damping consistent during repeated use. The rods carry the load between the body and axle, so their finish and size matter for durability. Watch for scratches on the rod, since they can damage the seal and let dirt into the shock.

Because this shock is set for no lift, it suits a ZJ at stock height. Owners who have raised a ZJ should compare their ride height with the shock’s rating before installing it. Rear shocks are often replaced in pairs so that damping stays even across the axle, and mounting bushings should be checked at the same time.

  • Inspect the rod for scratches or pitting
  • Check mounts and bushings for wear
  • Look for leaks along the body and seal
  • Replace in pairs when possible

Specifications

Brand Rancho
Series RS5000 Series
Part number RS5259
UPC 39703525909
Position Rear
Lift No lift (0 in. Lift/Drop)
Design Twin tube cellular gas
Valving Ten-stage velocity sensitive
Rod diameter 5/8-in. (16 mm) and 1/2-in. (12 mm)
Rod finish Changes from chrome to nitro-carburized coating
Piston 1-3/8 inch (on most applications)
Warranty Limited lifetime
Charge type Gas

Vehicle fitment

It is a direct-fit rear shock for the 1993 to 1998 Jeep Grand Cherokee (ZJ), in 5.9 Limited, Base, Laredo, Limited, Orvis, SE and TSi trim.

Grand Cherokee models from 1999 on, including the WJ generation, and ZJ years outside 1993 to 1998 are not covered. Confirm your vehicle’s year, model and trim before ordering.

What’s included

A single rear shock absorber.

Not included: Nothing about mounting hardware is stated.

SKU: RANRS5259 Category:

Specification

Shipping weight 5.20 lbs
Package dimensions 24.10 × 3.30 × 3.30 in
brands

Fitment

VehicleYearsTrims
Jeep Grand Cherokee (ZJ)1993–19985.9 Limited, Base, Laredo, Limited, Orvis, SE, TSi

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the RS5259 fit a 1999 Jeep Grand Cherokee?

No. Fitment is for the 1993 to 1998 Jeep Grand Cherokee (ZJ) only, with trims including Base, Laredo, Limited, Orvis, SE and TSi. Confirm your vehicle's year, model and trim before ordering.

Is the RS5259 a lift shock?

No. It is listed with no lift, shown as 0 in. Lift/Drop. A lifted ZJ should look for an RS5000 height that matches its suspension before installing.

What rod sizes and coating does the RS5259 have?

The rods are 5/8-in. (16 mm) and 1/2-in. (12 mm), with a nitro-carburized coating instead of chrome. The piston is 1-3/8 inch on most applications, and the warranty is limited lifetime.

Does a raised ZJ need a different shock?

Possibly. This shock is set for no lift, so a raised ZJ should check its ride height before installing. Compare the suspension setup and confirm the shock length suits the lift.

How can I tell if the rear shocks are worn?

Look for bouncing after bumps, a soft feel on the highway and oil on the body. Uneven tire wear and noise from the rear mounts can also point to worn shocks. Inspect the rods for scratches, since damage there lets grit into the seal.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon