Overview
The Rancho RS5246 is a rear RS5000 Series shock absorber that fits the 1997 to 2002 Ford Expedition in Eddie Bauer and XLT trim. It is a gas-charged unit rated for lift heights from 0 to 2.5 inches.
The RS5000 is a shock for light trucks and sport utility vehicles that suits both stock and raised builds. This RS5246 pairs ten-stage velocity sensitive valving with a 5/8-inch (16mm) piston rod, a 1 3/8-inch (35mm) piston and a red protective boot.
Key features
- Rear position for the 1997 to 2002 Ford Expedition
- Lift range of 0 to 2.5 inches (w/0 – 2.5 in. Lift)
- Gas-charged design with ten-stage velocity sensitive valving
- 5/8-inch (16mm) piston rod and 1 3/8-inch (35mm) piston
- Red protective boot included
Rear suspension and load
A rear shock on a full-size SUV carries much of the weight shifting when passengers or cargo are added. Under load, the shock works through its working range more often, which can lead to faster seal and piston wear if the vehicle is sitting low or carries a heavy roof load.
Rear shock wear often shows up as a body that keeps rocking after a bump, uneven tire wear or a rear that feels soft in corners. Inspect the eye bushings and bump stops during service, and check that the shock is not rubbing the spring or bracket at full compression.
- Check rear shock mounts for play
- Look for oil on the shock body
- Inspect bump stops for cracks
- Replace shocks in pairs
Specifications
| Brand | Rancho |
|---|---|
| Series | RS5000 Series |
| Part number | RS5246 |
| UPC | 10039703524602 |
| Position | Rear |
| Lift range | 0 to 2.5 in. |
| Charge type | Gas charged |
| Piston rod diameter | 5/8-inch (16mm) |
| Piston diameter | 1 3/8-inch (35mm) |
| Valving | Ten-stage velocity sensitive |
| Boot | Red |
| Quantity | Each |
Vehicle fitment
This is a direct-fit rear shock for the 1997 to 2002 Ford Expedition in Eddie Bauer and XLT trim.
Expedition models from 2003 onward and trims other than Eddie Bauer and XLT are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift range is 0 to 2.5 inches, so check that your Expedition’s current suspension height falls inside that range before fitting. Shocks are usually replaced in pairs, so plan to match the unit on the other side of the rear axle.
What’s included
One rear shock absorber with a red protective boot.
Not included: Check the package contents against your installation before starting.









