Overview
The Rancho RS5213 is a rear gas-charged RS5000 Series shock absorber that fits the 1992–2000 Mitsubishi Montero (Base, LS, RS, SR) and the 1997–1998 Mitsubishi Montero Sport (ES, LS, XLS). It is rated for 0 to 1 in. of lift.
Each shock is sold individually and includes ten-stage velocity sensitive valving, a 5/8-in. (16mm) piston rod, a 1 3/8-in. (35mm) piston and a red protective boot. The RS5000 Series is built as a workhorse shock for light trucks and sport utility vehicles, suited to stock and raised applications.
Key features
- Gas-charged, rear position
- Rated for 0 to 1 in. of lift
- Ten-stage velocity sensitive valving
- 5/8-in. (16mm) diameter piston rod
- 1 3/8-in. (35mm) diameter piston
- Red protective boot included
Shock absorber basics
A rear shock absorber controls how fast the suspension compresses and rebounds, keeping the tires in contact with the road over washboard and bumps. On a light truck or sport utility, rear shocks carry loads that change with passengers and cargo, so their damping also affects steering stability and braking. Velocity sensitive valving responds differently to slow body movement, such as cornering, than to quick impacts from ruts and rocks.
Gas-charged construction helps a shock resist foaming during repeated hard use, which is why it is often chosen for rough roads. Shocks wear gradually, so watch for a bouncy or floating ride, oil seeping down the body, uneven tire wear, or heavy nose-diving under braking. Inspect the boot for tears, since dirt and water entering past it can wear the piston rod and seal over time.
- Replace rear shocks in pairs to keep handling even side to side
- Check bushings and mounting hardware when the shock is removed
- Re-tighten mounting bolts after the first few drives
- Clean the piston rod before installing to protect the seal
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5213 |
| UPC | 10039703521304 |
| Series | RS5000 Series |
| Position | Rear |
| Fitment type | Direct Fit |
| Hydraulic / gas charged | Gas charged |
| Valving | Ten-stage velocity sensitive |
| Piston rod diameter | 5/8-in. (16mm) |
| Piston diameter | 1 3/8-in. (35mm) |
| Lift height | w/0 – 1 in. Lift |
| Boot | Red protective boot, included |
| Sold as | Each |
| Warranty | Limited lifetime (Rancho) |
Vehicle fitment
The manufacturer fitment list covers these vehicles for the RS5213:
- 1992–2000 Mitsubishi Montero (Base, LS, RS, SR)
- 1997–1998 Mitsubishi Montero Sport (ES, LS, XLS)
Montero years outside 1992–2000, Montero Sport years outside 1997–1998, and other Mitsubishi models are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One RS5213 rear shock absorber, sold as each, with a red protective boot included.









