Shock boots keep grit and water off a lifted shock's shaft and seal. How to size, vent and inspect one, when it can trap…
Shock Absorbers
Showing 565–576 of 3453 resultsSorted by popularity
-
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Smooth Body IFP Rear Shock – 985-24-209
Shock Absorbers & Shock AccessoriesFOX Performance Series 2.0 Smooth Body IFP Rear Shock – 985-24-209
- Rear FOX Performance Series 2.0 smooth body IFP shock, part number FOX985-24-209
- Fits the 2019–2022 Chevrolet Silverado 1500 and GMC Sierra 1500 in listed trims
- Lift range of 0 to 2
- 2.0 inch body, monotube design with a gas charge
SKU: FOX985-24-209 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Reservoir Smooth Body Shock – 985-24-191
Shock Absorbers & Shock AccessoriesFOX Performance Series 2.0 Reservoir Smooth Body Shock – 985-24-191
- Front FOX Performance Series 2.0 smooth body reservoir shock, part number FOX985-24-191
- Fits the 2011–2019 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD in listed trims
- External reservoir with billet reservoir clamp included
- Direct-fit application
SKU: FOX985-24-191 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Reservoir Smooth Body Rear Shock – 985-24-184
Shock Absorbers & Shock AccessoriesFOX Performance Series 2.0 Reservoir Smooth Body Rear Shock – 985-24-184
- Rear FOX Performance Series 2.0 smooth body reservoir shock, part number FOX985-24-184
- Fits the 2018–2026 Jeep Wrangler JL in 2-door and Unlimited 4-door models in the trims named
- Eyelet top and bottom mounts, 2.0 inch body diameter
- Billet reservoir clamp included
SKU: FOX985-24-184 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 IFP Smooth Body Shock – 985-24-181
- Front FOX Performance Series 2.0 smooth body IFP monotube shock, part number FOX985-24-181
- Fits the 2020–2026 Jeep Gladiator and 2018–2026 Jeep Wrangler JL in the trims named
- Gas charged, direct-fit application
- Internal floating piston design with nitrogen gas
SKU: FOX985-24-181 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 IFP Smooth Body Shock – 985-24-179
- Front FOX Performance Series 2.0 smooth body IFP monotube shock, part number FOX985-24-179
- Fits the 2020–2026 Jeep Gladiator and the 2018–2026 Jeep Wrangler JL in listed trims
- Gas charged, direct-fit application
- Race-proven damping.
SKU: FOX985-24-179 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Front Snap Ring Coil-Over IFP Shock – 985-62-011
Shock Absorbers & Shock AccessoriesFOX Performance Series 2.0 Front Snap Ring Coil-Over IFP Shock – 985-62-011
- Front FOX Performance Series 2.0 snap ring coil-over IFP shock, part number FOX985-62-011
- Fits the 2005–2015 Toyota Tacoma in Base, Pre Runner, TRD Pro and X-Runner models
- Lift range of 1 to 2, with no unit shown
- 2.0 inch body, OEM top mount and eyelet bottom mount, gas charged
SKU: FOX985-62-011 -
Shock Absorbers & Shock Accessories
FOX Performance Series 2.0 Coil-Over IFP Front Shock – 985-02-134
Shock Absorbers & Shock AccessoriesFOX Performance Series 2.0 Coil-Over IFP Front Shock – 985-02-134
- Front FOX Performance Series 2.0 coil-over IFP shock, part number FOX985-02-134
- Fits the 2019–2022 Chevrolet Silverado 1500 and 2019–2022 GMC Sierra 1500 in listed trims
- Lift range of 0 to 2
- Gas charged, internal floating piston design
SKU: FOX985-02-134 -
Shock Absorbers & Shock Accessories
FOX Performance Elite Series 2.5 Coilover Reservoir Front Shocks (2″ Lift) – 883-06-177
Shock Absorbers & Shock AccessoriesFOX Performance Elite Series 2.5 Coilover Reservoir Front Shocks (2″ Lift) – 883-06-177
- Front FOX Performance Elite 2.5 coilover reservoir shock, part number FOX883-06-177, for a 2 inch lift
- Fits the 2005–2023 Toyota Tacoma in Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport, Trail and X-Runner models
- 2.5 inch aluminum body with an external reservoir and DSC adjuster
- Compressed length 16.640 inches, extended length 21.370 inches
SKU: FOX883-06-177 -
Shock Absorbers & Shock Accessories
FOX Performance Elite Rear 2.5 Adjustable Reservoir Shock Set – 883-26-054
Shock Absorbers & Shock AccessoriesFOX Performance Elite Rear 2.5 Adjustable Reservoir Shock Set – 883-26-054
- Rear FOX Performance Elite 2.5 remote reservoir adjustable shock set, part number FOX883-26-054
- Fits the 2018–2026 Jeep Wrangler JL in 2-door and Unlimited 4-door models in the trims named
- Hydraulic charge rather than gas
- External reservoir for added oil and nitrogen capacity
SKU: FOX883-26-054 -
Shock Absorbers & Shock Accessories
FOX Performance Elite 2.5 Series Piggyback Adjustable Rear Shocks – 883-26-074
Shock Absorbers & Shock AccessoriesFOX Performance Elite 2.5 Series Piggyback Adjustable Rear Shocks – 883-26-074
- Rear FOX Performance Elite 2.5 piggyback adjustable shock, part number FOX883-26-074
- Fits the 2020–2026 Jeep Gladiator in 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport models
- 2.5 inch body with eyelet top and bottom mounts
- External compression adjusters and a gas charge
SKU: FOX883-26-074 -
Shock Absorbers & Shock Accessories
FOX Factory Race Series 3.0 Internal Bypass Remote Reservoir DSC Front Shock Set – 883-26-057
Shock Absorbers & Shock AccessoriesFOX Factory Race Series 3.0 Internal Bypass Remote Reservoir DSC Front Shock Set – 883-26-057
- Front FOX Factory Race Series 3.0 internal bypass remote reservoir DSC shock set, part number FOX883-26-057
- Fits the 2020–2026 Jeep Gladiator and the 2018–2026 Jeep Wrangler JL in listed trims
- Hard-anodized aluminum body with a remote reservoir, eyelet top and bottom mounts
- Designed for a 2 to 3 inch aftermarket lift kit
- Gas charged, direct-fit application
SKU: FOX883-26-057
What a shock absorber does
A shock absorber is a damper. The spring holds the vehicle up, and the shock controls how fast that spring moves. Without working dampers a truck bounces repeatedly after every bump, tires lose contact with the ground, and braking and steering suffer. Off-road, shocks also absorb heat from constant motion, which is why fade becomes a concern on long, rough stretches.
Key specifications to compare
- Collapsed and extended length: These two numbers set the travel (extended minus collapsed). The shock must be long enough that it never limits suspension travel or bottoms out before the bump stops do, and short enough that it is not the first thing to run out at full droop.
- Mounts: Bar pin, stem, eyelet and bolt-in ends are not interchangeable without hardware. Match both the upper and lower mount styles to your vehicle.
- Body design: Monotube shocks usually run cooler and resist foaming better. Twin-tube shocks are common as stock replacements and are often quieter and lower in cost. Many listings state the body diameter, such as a 46mm smooth body.
- Reservoir: An external reservoir adds oil volume and gas capacity, which helps with heat in hard or sustained use.
- Shaft diameter: A larger shaft is generally more resistant to bending.
Choosing for your use
For a daily driver with a modest lift, a quality non-adjustable monotube or gas-charged twin-tube shock sized for your lift height is usually enough. If you tow, carry a heavy bumper and winch, or run fast desert roads, look at larger bodies, reservoirs and tunable valving. Pair the shock with the right spring rate; a shock cannot make up for a spring that is too soft or too stiff for the load.
Fitment and installation
Shocks are specific to lift height, axle and whether they are front or rear, so confirm fitment for your exact year, make and model and check the manufacturer's specifications. Replace shocks in axle sets, since one new and one worn shock gives uneven handling. Support the axle before removal so it cannot droop and stretch brake lines, and tighten fasteners to the specified torque. If you changed ride height, have the alignment checked afterward.
A final point on tuning: if a shock offers adjustable damping, change one setting at a time and note the result on a familiar road. Heavier loads, such as a winch bumper, roof tent or camping gear, often call for firmer valving than an empty truck. Inspect boots, bushings and mounting hardware at every oil change, since a worn bushing can mimic a failing shock.
Mistakes to avoid
The most common error is choosing shocks by brand or price without checking the length numbers. A shock that is too short lets the axle droop until the springs unseat or brake lines tighten, while one that is too long bottoms out and can bend the shaft or damage the mounts. Measure from mount to mount at ride height, then at full droop and full compression, and compare with the listed collapsed and extended lengths.
- Do not ignore worn bushings, since new shocks with tired bushings still clunk.
- Do not use a shock as a travel limiter; bump stops and limit straps do that job.
- Do not install shocks with the vehicle hanging from the frame and the springs unloaded, because mounts then sit in the wrong position.
Test drive on a familiar road after installation and listen for rattles before heading onto the trail.
Related guides
- Shock Boots: Why Every Lifted Shock Needs One
- Jeep JK Lift Heights: 2.5 vs 3.5 vs 4.5 Inch Compared
Jeep JK lift heights compared: the tires 2.5, 3.5 and 4.5-inch lifts clear, the track bars, arms, lines and driveshafts each needs, and which…
- Twin-Tube, Monotube or Reservoir: Picking the Right Shock
Twin-tube, monotube and reservoir shocks compared: how each handles heat, how to size one for your lift, and which design fits how you drive.
- Bilstein 5100 vs Fox 2.0 Performance: Which Shock for Your Lifted Truck or Jeep
Bilstein 5100 vs Fox 2.0 Performance: body, shaft, reservoir, travel and lift ratings across 417 part numbers, which trucks and Jeeps both fit, how…
Popular Shock Absorbers brands
- Pro Comp Suspension (898)
- Bilstein (615)
- Rancho (567)
- Fox Racing Shox (345)
- Skyjacker (279)
- Fabtech (232)
- ARB 4x4 Accessories (136)
- FOX (85)
- ICON Vehicle Dynamics (84)
- Rubicon Express (78)
- Icon Suspension (77)
- King Shocks (71)
Shock Absorbers FAQ
How do I know when shocks are worn out?
Common signs are oil leaking down the body, a bouncy or floaty ride, nose dive under braking, uneven tire wear and clunking from the mounts. A worn shock may also feel hot or weak when you compare it with a new one.
What is the difference between monotube and twin-tube shocks?
A monotube has a single working chamber with a floating piston separating oil and gas, which tends to shed heat well. A twin-tube uses an inner and outer tube and is common in factory-style replacements. Both can work well when matched to the vehicle.
Do I need new shocks after a lift?
Usually yes. A lift changes the distance between the mounts, so stock shocks may limit travel or bottom out. Choose shocks whose collapsed and extended lengths suit your lift height, and confirm the specifications with the manufacturer.
Should shocks be replaced in pairs?
Yes, replace both shocks on an axle together. Mixing new and worn dampers makes the two sides react differently, which affects handling and braking stability, especially on rough surfaces.






