Overview
The Rancho RS999911 is a 2 inch Loaded QuickLIFT front quick-strut that raises the front end to remove the factory nose-down rake on a pickup or SUV. It arrives as a complete, fully assembled unit with the strut, coil spring and upper mount, so it can be fitted as one piece.
The added ride height allows larger tires, up to 35 inches depending on application. Nine adjustment positions let owners set ride quality for their driving, and the strut is compatible with the myRIDE wireless controller for changes from inside the cab.
Key features
- Fully assembled quick-strut with coil spring and upper mount
- Two inch lift for the front end
- Nine adjustment positions
- Compatible with the myRIDE wireless controller
- Gas charged damping
- Direct-fit design
Checks before installation
A front strut replacement is a single-corner job with a few checks that pay off. Before lifting the truck, confirm the strut and spring match the same side and that the mount hardware is included. The assembly holds the spring under load, so follow a method that keeps hands clear of the spring during removal. Clean the mounting surfaces, check how the brake lines and wiring are routed, and make sure the stand sits on a solid point.
Think about what gets replaced along with the strut. Worn upper mounts, control arm bushings and tie rod ends affect how the new strut performs. A front height change also calls for an alignment and a check of steering stops. If the truck already shows uneven tire wear, sort that out before or during the job so the new strut is not blamed for an older problem.
- Confirm the strut matches the correct side
- Check mount hardware before assembly
- Clean mating surfaces before installing
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999911 |
| Shock series | QuickLIFT Series |
| Fitment type | Direct Fit |
| Damper type | Gas charged |
| Lift height | 2 in. |
| Adjustment positions | 9 |
| Maximum tire size | Up to 35 inches, depending on application (per Rancho) |
Vehicle fitment
It is a direct-fit strut for pickups and SUVs. Check fit for your truck’s year, model and trim before ordering.
Compare the front dimensions of the strut with your current parts, and check the year, model and trim against your truck before buying.
Installation notes
The strut, spring and upper mount come assembled, so the work is a front strut swap rather than drilling or welding. A two inch front lift shifts alignment and driveline angles, which makes a post-install alignment and driveline check worthwhile. Use jack stands and keep hands clear of the spring while the assembly is being removed.
What’s included
The kit includes the strut, coil spring and upper mount.
Not included: The myRIDE wireless controller is absent from this kit’s contents, even though the strut is designed to work with it.









