Overview
The Rancho RS999912 is a 1.5 inch Loaded QuickLIFT front quick-strut for the 2009–2013 Ford F-150, built to level the front end and cancel the factory nose-down rake. It is supplied fully assembled with the strut, coil spring and upper mount, so the front of the truck can be lifted with a single unit.
The added front height allows larger tires, up to 35 inches depending on application. Nine adjustment positions let owners set ride quality to suit how they drive, and the strut works with the myRIDE wireless controller so settings can be changed from the cab as road conditions change.
Key features
- Fully assembled quick-strut with coil spring and upper mount
- Levels the front end and removes factory nose-down rake
- Nine adjustment positions for ride quality
- Compatible with the myRIDE wireless controller
- Gas charged damper
Before you buy a front strut
A loaded strut replaces the front shock, coil spring and upper mount as one unit, so the spring rate and ride height are set when the assembly is built. Before buying, compare your truck’s current ride height, the tire size you plan to run and how you use the vehicle on pavement and off it. A taller front end can change how the truck handles at speed, so plan some break-in driving to get used to the new stance.
Wear on the old front components often shows up as bouncing after bumps, uneven tire wear or a nose that dips under braking. If those signs are present, replacing both front struts together keeps the two sides matched. Inspect the rear suspension too, since a front lift can make the back look low by comparison.
- Check tire clearance at full steering lock
- Replace the front struts as a pair when possible
- Re-torque fasteners after the first few drives
- Inspect brake lines and sway bar links during install
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999912 |
| Shock series | QuickLIFT Series |
| Position | Front Right |
| Fitment type | Direct Fit |
| Damper type | Gas charged |
| Lift height | 1.5 inch |
| Adjustment positions | 9 |
| Maximum tire size | Up to 35 inches, depending on application (per Rancho) |
Vehicle fitment
It fits the 2009–2013 Ford F-150 in the FX2, Harley-Davidson Edition, King Ranch, Lariat, Lariat Limited, Limited, Platinum, STX, XL and XLT trims.
Other Ford F-150 model years and other Ford models are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the strut is supplied assembled with its spring and upper mount, the replacement is a front strut swap, not a drilling or welding job. A 1.5 inch front lift changes alignment, so schedule a front-end alignment afterward. Support the truck on stands whenever you work beneath it.
What’s included
The kit includes the strut, coil spring and upper mount.
Not included: Rancho’s myRIDE wireless controller is a separate item and does not appear in the parts list for this kit.









