Overview
The Rancho RS999907 is a 1.75 inch Loaded QuickLIFT front left quick-strut for the 1995–2004 Toyota Tacoma. It is a complete front strut assembly with the coil spring and upper mount already installed, which is how Rancho aims to raise the front end and reduce the factory nose-down rake without building the strut from separate parts.
The added ride height makes room for larger tires, up to 35 inches depending on application. Nine adjustment positions let you set ride firmness for the way you drive, and the strut works with Rancho’s myRIDE Wireless Controller so settings can be changed from the cab.
Key features
- Fully assembled quick-strut with coil spring and upper mount
- 1.75 inch lift for the front left corner
- Gas charged shock design
- Nine adjustment positions for ride firmness
- Compatible with the myRIDE Wireless Controller
- Intended for tires up to 35 inches, depending on application
- Reduces the factory nose-down rake at the front
Single-corner front replacement
Replacing one front strut is common after an impact or a leak, but a left-side unit is best judged against the right side. A new strut that is firmer or taller than the old one can pull the truck toward one side or change steering feel. When possible, match the damping setting and height on both front corners so the truck tracks straight and the tires wear evenly.
Front struts also carry steering and braking loads, so the strut mount, bearing and the rest of the front suspension should be inspected during the swap. Check the tie rod ends, lower control arm bushings and wheel bearings for play, since they change how the strut moves. On older trucks, rust on the mounts or bolts can slow the job, so use penetrating oil and check the threads before tightening.
- Compare strut height with the right side
- Inspect lower control arm bushings
- Check wheel bearings for play
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999907 |
| Lift height | 1.75 inch |
| Shock series | QuickLIFT Series |
| Position | Front Left |
| Fitment type | Direct Fit |
| Hydraulic / gas charged | Gas charged |
| Adjustment | 9 positions |
| Included | Coil spring, upper mount and strut |
| Controller compatibility | myRIDE Wireless Controller |
Vehicle fitment
Rancho’s manufacturer list places this left front unit on the 1995–2004 Toyota Tacoma, covering the Base, Limited, Pre Runner, S-Runner and SR5 trims.
The second generation Tacoma, 2005–2018, is not covered by this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One left front quick-strut with coil spring, upper mount and strut body, arriving fully assembled.
Not included: The myRIDE Wireless Controller is not among the included parts.









