Overview
The Rancho 1.25 Inch Loaded QuickLIFT, part number RS999902, is a fully assembled front strut with the strut body, coil spring and upper mount. It mounts on the front passenger side and levels the front end by removing the factory nose-down rake, giving a 1.25 in. lift.
The Loaded QuickLIFT arrives ready to install and is designed to level the front of a pickup or SUV quickly. The added ride height allows tires up to 35 inches depending on application. Check fit for your pickup or SUV’s year, model and trim before ordering.
The strut is adjustable in nine positions and works with the Rancho myRIDE Wireless Controller, which lets you change the damping from the cab as driving conditions change.
Key features
- Loaded QuickLIFT strut with coil spring and upper mount
- 1.25 in. lift for a leveled front end
- Fully assembled and ready to install
- Nine adjustable damping positions
- Compatible with the myRIDE Wireless Controller
- Front passenger side mounting location
- Designed to remove factory nose-down rake
Front end leveling basics
Factory front springs can sag over time, and that sag pulls the nose down and shifts weight toward the front axle. A strut-and-spring assembly restores height by replacing those worn components together, which keeps the new ride height consistent across the front end. Because the spring and strut are one unit, the spring rate and mount geometry are set together, so the front end is less likely to feel mismatched than when a shock is swapped alone.
After installation, check the parts the height change touches. Brake hoses and ABS sensor wires may need a look if the front end moves, and the steering stops and tie rod ends should be checked for clearance at full lock. Keep the upper mount hardware snug, and inspect the strut boot for cracks in the first few drives. If the front tires wear on one edge after the change, the alignment is worth another check.
- Recheck brake line and ABS wire routing
- Inspect tie rod ends for play
- Look for tire rub at full steering lock
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999902 |
| Product | Loaded QuickLIFT quick-strut |
| Lift | 1.25 in. |
| Mounting location | Front passenger side |
| Includes | Coil spring, upper mount and strut |
| Adjustment | 9-position adjustable |
| Controller compatibility | myRIDE Wireless Controller |
| Shock series | QuickLIFT Series |
| Hydraulic / gas charged | Gas charged |
| Fitment type | Direct fit |
| Tire clearance | Up to 35 inches, depending on application |
Vehicle fitment
It is a direct-fit strut for front-end leveling on pickups and SUVs. Check fit for your year, model and trim before buying.
Compare the front dimensions of the strut with your current parts, and check the year, model and trim against your truck before ordering.
Installation notes
Because the strut is supplied fully assembled, installation replaces the strut, coil spring and upper mount together rather than the shock alone. Have the front alignment checked afterward, since the added ride height changes alignment angles. Gas-charged struts are under pressure, so handle the assembly with care during removal.
What’s included
Loaded QuickLIFT strut, coil spring and upper mount.
Not included: The myRIDE Wireless Controller is compatible with this strut but is not part of the unit.








