Overview
The Rancho RS999908 is a 1.75 inch Loaded QuickLIFT front quick-strut for the 1995–2004 Toyota Tacoma, designed to level the front end and remove the factory nose-down rake on a pickup or SUV. Rancho supplies it fully assembled, with the strut, coil spring and upper mount ready to install, so the front of the truck can be raised without gathering separate components.
The added front height leaves room for larger tires, up to 35 inches depending on application. The strut has nine adjustment positions, so ride quality can be tuned to how the truck is driven. It is compatible with the myRIDE wireless controller, which lets owners change the setting from inside the cab as driving conditions change.
Key features
- Fully assembled quick-strut with coil spring and upper mount
- Raises the front end to remove factory nose-down rake
- Nine adjustment positions for ride quality
- Compatible with the myRIDE wireless controller for in-cab changes
- Gas charged damper
- Allows larger tires, up to 35 inches depending on application
Living with a front lift
The front springs carry much of the engine weight, so lifting the front changes how the weight sits over each axle. Many owners notice a slightly different steering feel and braking pitch after a front lift, especially when the truck is loaded. Settling in usually takes a few drives, and small changes to the damping setting can help match the feel to daily driving.
Tire rub and clearance are the usual issues. Full steering lock can bring the tire close to the inner fender or a brake line, so check that turns are clean on both sides. Keep the front bump stops and steering stops in good shape. Front tires that wear on one edge often point to a geometry or alignment issue, and it is worth checking early.
- Check steering centering after the first drive
- Inspect the inner fender for rub marks
- Watch front tire wear across the tread
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999908 |
| Shock series | QuickLIFT Series |
| Position | Front Right |
| Fitment type | Direct Fit |
| Damper type | Gas charged |
| Lift height | 1.75 inch |
| Adjustment positions | 9 |
| Maximum tire size | Up to 35 inches, depending on application (per Rancho) |
Vehicle fitment
This front quick-strut fits the 1995–2004 Toyota Tacoma in Base, Limited, Pre Runner, S-Runner and SR5 trims.
This fitment does not cover Tacoma model years after 2004. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the strut, coil spring and upper mount arrive assembled, this is a front strut replacement rather than a drilling or welding job. A front lift changes alignment and steering geometry, so have the front end aligned afterward. Support the truck securely on jack stands while working underneath it.
What’s included
The kit includes the strut, coil spring and upper mount.
Not included: The myRIDE wireless controller is a separate component and is not part of this strut kit.









