Overview
The Rancho RS999773 is a gas-charged RS9000XL Series shock absorber with nine positions of manual or remote damping adjustment. It is a Direct Fit shock for the RS9000XL Series.
The shock has a 2.75 in. liquid metallic body, an 18mm chrome rod and a protective boot. It also has a nitrogen gas charge and red urethane bushings.
Key features
- Nine damping positions adjustable by hand or remote
- Nitrogen gas charged
- 2.75 in. (70mm) liquid metallic body
- 18mm chrome rod
- Red urethane bushings
- Protective boot included
Protective boots and bushings
The protective boot covers the exposed piston rod and keeps dirt, sand and water away from the seal. A torn boot lets grit scratch the rod, and that damage can wear the seal and let oil leak out. Inspect the boot whenever the wheels are off, and replace the shock if the rod shows pitting or scoring.
Red urethane bushings are firmer than rubber and carry more road feel, which some drivers like on a trail rig. They can squeak when dry, so a light lubricant suited to the bushing material helps. Check the mounting hardware when you fit the shock, and retighten it after the first few drives on rough ground.
- Look for cracks or tears in the boot
- Check the rod for scoring or fluid on the body
- Inspect bushings for splitting or wear
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999773 |
| Shock series | RS9000XL |
| Body diameter | 2.75 in. (70mm) |
| Rod diameter | 18mm chrome |
| Tuning | 9-position manual/remote (myRide) |
| Gas charge | Nitrogen |
| Finish | Liquid metallic |
| Bushings | Red urethane |
| Warranty | Limited Lifetime Warranty |
| Fitment type | Direct Fit |
Vehicle fitment
This shock is marked Direct Fit for the RS9000XL Series. Confirm compatibility with your truck or Jeep’s year, model and trim before ordering.
Compare part numbers before assuming another RS9000XL shock matches your vehicle. Confirm your vehicle’s year, model and trim before ordering.
What’s included
One shock absorber with a protective boot is included. Check the package contents against your installation before starting.














