Overview
The Skyjacker Softride Nitro N8098 is a gas charged rear shock absorber from the N8000 series, fitting the 2007–2014 Toyota FJ Cruiser. It uses twin tube construction and 150 PSI nitrogen gas, and it is built for a suspension with a 2.5 in. lift.
A shock absorber limits how quickly the springs compress and rebound, which keeps the tires in contact with uneven ground. The Nitro line adds multi-stage velocity sensitive valving, which changes the damping force with the speed of shock movement, so the response differs on small bumps and on hard impacts.
Key features
- Gas charged design with 150 PSI nitrogen gas
- Twin tube construction
- Multi-stage velocity sensitive valving
- Bonded iron piston
- Chromed piston rod, 5/8 in. diameter, hardened with a double chrome finish
- Red polyurethane bushings
- Red boot included
- 15 other colors are available.
- Limited lifetime warranty
Rear suspension and lift
On a rear axle, a shock controls how the body and axle move against each other, which affects ride comfort on washboard roads and how the rear settles after a jolt. Matching a shock to the lift height keeps that control in its intended range, so the rear does not sag or hop over whoops.
Gas charged designs maintain damping under heat and repeated use, but the rod, seal and boot still wear. Check for oil on the body, a torn boot or a rod that has pitted, since any of these reduce control. Keep the mounting eyes clean and tight to avoid noise.
Before removing the old unit, support the vehicle securely and relieve the spring load, since a compressed spring can release suddenly. Mount the new shock with the bushings seated so it does not bind at full travel.
- Check rear suspension height before fitting
- Look for oil residue on the body
- Inspect the boot and rod for damage
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8098 |
| UPC | 803696174679 |
| Series | N8000 (Nitro Series) |
| Position | Rear |
| Fitment type | Direct fit |
| Lift height | 2.5 in. lift |
| Hydraulic or gas charged | Gas charged |
| Gas charge | 150 PSI nitrogen gas |
| Construction | Twin tube |
| Valving | Multi-stage velocity sensitive |
| Piston | Bonded iron |
| Piston rod | 5/8 in. diameter, hardened, double chrome |
| Bushings | Red polyurethane |
| Boot | Red |
| Quantity | Each |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 2007–2014 Toyota FJ Cruiser in the Base, TRD Special Edition and Trail Teams Special Edition trims. No other Toyota model is covered by this shock.
Model years outside 2007–2014 and FJ Cruiser trims beyond those named are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Skyjacker ties this shock to a 2.5 in. lift, so check that your rear suspension height matches that setup before fitting it. Support the vehicle securely and relieve the spring load before removing the old unit, since a compressed spring can release suddenly.
What’s included
One red boot is included with the shock, and the unit is listed in a quantity of each.
Not included: Check what mounting hardware and other suspension parts your installation needs before starting.









