Overview
The Skyjacker Softride Nitro Shock Absorber N8055 is a front gas-charged twin tube shock with a 13.54 in. collapsed length, 22.75 in. extended length and 9.20 in. stroke. It is rated for a 2 – 6 in. lift and fits a wide range of trucks and SUVs from 1966 to 2001.
The unit is built for heavy-duty work and is best suited to severe off-road use. It has multi-stage velocity sensitive valving, an oversized piston head and an internal rebound bumper. Compression control is designed to prevent air bubbles from forming, which reduces fade. The firmer ride suits off-road driving more than most street use.
Key features
- Multi-stage velocity sensitive valving
- Oversized piston head
- Internal rebound bumper
- Twin tube construction with 150 PSI nitrogen gas
- Compression control to reduce fade from air bubbles
- Hardened, double chrome 5/8 in. diameter rod
- White body with a red polyurethane boot
Ride height and travel
Stroke and length decide how far a shock can travel before it runs out of room. On a lifted truck the mounts move farther apart, so the shock may need more extension. Measure the mounted length with the suspension at rest and again with the tires hanging, then compare both to the unit’s collapsed and extended dimensions before fitting.
Heavy-duty shocks are often paired with upgraded springs, control arm bushings and steering components that hold the axle in position. Worn bushings let the shock sit at an angle and bind, which shortens its service life. When the truck sees severe trail use, inspect the boot and the rod after each outing.
- Measure at rest and with tires hanging
- Check mount bushings for cracks
- Inspect the rod for nicks
- Keep the boot clean and intact
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8055 |
| UPC | 803696151595 |
| Shock series | Nitro Series |
| Position | Front |
| Construction | Twin tube |
| Gas charge | 150 PSI nitrogen gas, gas charged |
| Piston | Oversized head |
| Collapsed length | 13.54 in. |
| Extended length | 22.75 in. |
| Shock stroke | 9.20 in. |
| Piston rod | Hardened, double chrome, 5/8 in. diameter |
| Bushings | Urethane |
| Boot | Red polyurethane |
| Body color | White |
| Lift range | 2 – 6 in. lift |
| Unit | Single shock |
Vehicle fitment
Based on the manufacturer fitment list, the N8055 covers Ford Bronco, Bronco II and Bronco Sport models, F-100 through F-350 pickups, Ford Explorer and Ranger, the Jeep Wrangler (YJ), Isuzu Rodeo, Rodeo Sport and Trooper, Honda Passport, Mazda B-series and Navajo, Toyota 4Runner and Pickup, Nissan Pathfinder, and International Scout II models.
Vehicles outside the years listed, and Toyota Tacoma or Dodge models, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the stroke and the collapsed and extended lengths against your truck’s mounting points before fitting. The 2 – 6 in. lift range applies, and the stiff ride Skyjacker describes is worth weighing against your daily driving.
What’s included
One front shock absorber with its red polyurethane boot.








