Overview
The Skyjacker Softride Nitro N8083 is a rear shock for a wide range of Chevrolet and GMC trucks from 1968 to 2000, including Blazers, Suburbans, Tahoe and Yukon models. The lift height note is w/3 – 4 in. Lift, which points to a modest suspension lift rather than a large one.
The fitment covers C-series, K-series, R-series and V-series pickups as well as the GMC Jimmy. The earliest years are 1968 and 1969 Suburbans. The unit uses 150 PSI nitrogen gas, multi-stage velocity sensitive valving and a bonded iron piston.
Key features
- Multi-stage valving that changes damping with piston speed
- Twin tube body with a 150 PSI nitrogen gas charge
- Oversized piston head
- Bonded iron piston and chromed piston rod
- 5/8 in. diameter hardened double chrome rod
- Red polyurethane bushings
- Red boot included
- Limited Lifetime Warranty and 15 other colors noted by Skyjacker
Matching older GM trucks
Older GM pickups and Suburbans often have rear dampers that have been replaced several times, so the mounting points may show wear or past repair. Before a swap, inspect the frame brackets and axle mounts for rust and check that the eyes and studs are straight.
Lift height changes the shock’s working length, so measure the current rear lift and make sure the replacement suits your build. A shock that is too short for the lift can bottom out, while one that is too long can strain the mounts and bushings.
Replacing the bushings and checking the bump stops when the shock is replaced helps keep the rear end composed. Keep the vehicle’s year and body style on hand, since fitment for trucks of this age can vary by production run.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8083 |
| UPC | 61490115467 |
| Series | Softride Nitro (N8000 series) |
| Position | Rear |
| Construction | Twin tube, gas charged |
| Gas charge | 150 PSI nitrogen |
| Piston | Bonded iron |
| Piston rod | Chromed, 5/8 in. diameter, hardened |
| Bushings | Red polyurethane |
| Boot | Red |
| Lift height note | w/3 – 4 in. Lift |
| Unit of sale | Each |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
It fits 1973–1986 Chevrolet C10, C20 and C30 models, 1969–1986 C10 and C20 Suburbans, 1975–1984 K5 Blazers, 1992–1994 Blazers, 1995–1999 Tahoe, 1992–1998 Yukon, and a long run of GMC C-, K- and R-series pickups and Suburbans from 1968 through 2000, including the 1973–1984 Jimmy.
The list does not include trucks from 2001 onward, Ford or Dodge models, or Chevrolet Silverado and GMC Sierra trucks from 2001 on. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The lift height note reads w/3 – 4 in. Lift. Because this fitment spans more than three decades of body styles, match your exact year and model to the fitment entries before fitting the shock.
What’s included
The unit is one rear shock absorber with a red boot.
Not included: the second rear shock for the opposite side.









