Overview
The Skyjacker Softride Nitro N8077 is a rear shock absorber for the 2000–2005 Ford Excursion in Eddie Bauer, Limited, XLS and XLT trims. It is a rear position unit with a lift height range of w/5.5 – 8 in. Lift, which fits an Excursion with a suspension lift.
The Excursion is a full-size body-on-frame SUV, so its rear dampers carry a lot of weight at every bump. The N8077 is gas charged with 150 PSI nitrogen, uses multi-stage velocity sensitive valving and has a bonded iron piston. Its 5/8 in. hardened rod carries a double chrome plating.
Key features
- Velocity sensitive valving with multiple stages
- Twin tube body pressurized to 150 PSI with nitrogen
- Bonded iron piston
- Hardened rod, 5/8 in. diameter, double chrome plated
- Red polyurethane bushings
- Red boot included
- Skyjacker says 15 other colors are offered
- Limited Lifetime Warranty per the manufacturer
Rear damping on a full-size SUV
A full-size SUV carries a heavy body on its rear axle, so the rear dampers absorb a lot of energy on washboard roads and when the vehicle is loaded. On a truck-based SUV like this, damping that is too soft lets the rear settle slowly after bumps, while damping that is too stiff can make the ride feel harsh.
Rear shocks wear at the bushings and rod seal first, so look for oil on the body, uneven rear height or clunking when the tailgate and rear axle move. Replacing the bushings at the same time as the shock keeps the mount tight and the damper working as intended.
If the vehicle carries roof loads, a trailer or heavy gear, consider the rated capacity of the springs and tires alongside the shock. Matching all rear components to the same lift and load keeps the back of the vehicle level and predictable.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8077 |
| UPC | 803696154299 |
| Series | Softride Nitro (N8000 series) |
| Position | Rear |
| Construction | Twin tube, gas charged |
| Gas charge | 150 PSI nitrogen |
| Piston | Bonded iron |
| Piston rod | Chromed, 5/8 in. diameter, hardened |
| Bushings | Red polyurethane |
| Boot | Red |
| Lift height note | w/5.5 – 8 in. Lift |
| Unit of sale | Each |
| Warranty | Limited Lifetime Warranty |
Vehicle fitment
It is a direct fit for the 2000–2005 Ford Excursion in Eddie Bauer, Limited, XLS and XLT trims.
The list does not cover Ford F-Series pickups, the Expedition, or Excursions outside the 2000–2005 model years. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Measure the rear lift on your Excursion before starting, and compare it with the w/5.5 – 8 in. Lift range. Check the rear mounting points against your vehicle before you begin the swap.
What’s included
The package holds one rear shock absorber fitted with a red boot.
Not included: the second rear shock for the opposite side.







