Overview
The Skyjacker Softride Nitro Shock Absorber N8057 is a front gas-charged twin tube shock for 1980 to 1996 Ford Bronco and F-150 trucks. Skyjacker rates it for a 4 – 8 in. lift.
The shock is built with multi-stage velocity sensitive valving, a bonded iron piston and a 150 PSI nitrogen gas charge. The 5/8 in. rod is hardened and double chrome. Red polyurethane bushings and a red boot come with the unit, and the warranty is limited lifetime.
Key features
- Front position unit rated for 4 – 8 in. lift
- Twin tube construction
- Multi-stage velocity sensitive valving
- 150 PSI nitrogen gas charge
- Bonded iron piston
- Chromed rod, 5/8 in. diameter, hardened and double chrome
- Red polyurethane bushings and red boot
Keeping a front shock healthy
Front shocks on Broncos and F-150s work in an area with a lot of dirt, water and road spray. Keeping the rod clean and the boot intact is the simplest way to extend service life, since grit that gets past a torn boot scores the chrome and damages the seal. Wash the rod after off-road runs and look at the boot each time the wheels come off.
Gas charge and damping are the other half of the picture. A shock that has lost its gas pressure may feel soft or foamy, and one with worn valving may fade on long descents. Pair the shock with sound bushings and mounts, since loose hardware lets the shock move and load the body in ways it was not built for.
- Rinse the rod after mud or water
- Look for tears in the boot
- Check for oil on the body
- Tighten mounting hardware after the first trail runs
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8057 |
| UPC | 803696152462 |
| Shock series | Nitro Series (N8000) |
| Position | Front |
| Construction | Twin tube |
| Gas charge | 150 PSI nitrogen gas, gas charged |
| Piston | Bonded iron |
| Piston rod | Chromed, 5/8 in. diameter, hardened and double chrome |
| Bushings | Red polyurethane |
| Boot | Red |
| Lift range | 4 – 8 in. lift |
| Warranty | Limited lifetime |
| Unit | Each |
Vehicle fitment
Based on the manufacturer fitment list, the N8057 covers 1980 to 1996 Ford Bronco models in Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite and XLT Sport trims, and 1980 to 1996 Ford F-150 models in Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT and XLT Lariat trims.
Bronco and F-150 models outside 1980 to 1996, and F-250 or F-350 trucks, are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The N8057 is labeled for a 4 – 8 in. front lift. Confirm your front lift falls inside that range, because the shock is rated only for that band.
What’s included
One front shock absorber with a red boot.









