Overview
The Skyjacker N8094 is a front Nitro Series gas-charged shock absorber for trucks with a 4 – 5 in. lift. It fits 1994–2010 Dodge Ram 2500 and 3500 trucks, 2005–2018 Ford F-250 Super Duty, 2005–2017 Ford F-350 Super Duty, and selected 2011–2018 Ram 2500 and 2011–2012 Ram 3500 models.
The body is twin tube, with an inner pressure tube inside an outer reservoir tube. It pairs multi-stage velocity sensitive valving with a 150 PSI nitrogen gas charge and a bonded iron piston on a hardened, double chrome rod. Red polyurethane bushings and a red boot are included, and a limited lifetime warranty applies.
Key features
- Multi-stage velocity sensitive valving
- Twin tube construction
- 150 PSI nitrogen gas charge
- Bonded iron piston
- 5/8 in. diameter hardened, double chrome piston rod
- Red polyurethane bushings
- Includes red boot
Matching the shock to your lift
A front shock for a 4 – 5 in. lift works within a suspension height that differs from stock, so the damping and length need to suit the new geometry. Match the shock to the lift you actually run, not to the height you plan to reach later. Shocks that are too short or too long can limit travel or bind at full extension.
Gas-charged twin tube shocks rely on their nitrogen charge and piston seal to hold damping steady. Heat builds quickly during off-road runs, and a worn seal can let the damping fade. If the shock is hot to the touch after a short drive, or the ride feels soft after long trips, the unit may be fading.
Replace bushings and mounts when the shock is changed. Worn red polyurethane bushings let the shock bind or wobble, and cracked boots let grit into the rod. Clean the rod before reinstalling so the seal is not scored.
- Confirm the shock length for your lift
- Check for heat fade after long runs
- Replace worn bushings and boots
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8094 |
| UPC | 803696182315 |
| Shock series | Nitro Series (N8000 series) |
| Position | Front |
| Lift height | 4 – 5 in. |
| Construction | Twin tube |
| Hydraulic or gas charged | Gas charged |
| Gas charge | 150 PSI nitrogen |
| Piston | Bonded iron |
| Piston rod | Chromed, 5/8 in. diameter, hardened and double chrome |
| Bushings | Red polyurethane |
| Boot | Red |
| Warranty | Limited lifetime |
Vehicle fitment
It fits 1994–2010 Dodge Ram 2500 and 3500 models in several trims, including Laramie, SLT and ST, plus the Ford and Ram models named above. Trims are shown for each model.
Not listed: 2013 Ram 2500, Ram 3500 from 2013 onward, Ford F-250 from 2019 onward, and F-350 from 2018 onward. Verify your year, model and trim against the list before installing.
Installation notes
The cylinder is charged to 150 PSI with nitrogen, so have a shop experienced with gas-charged shocks handle any removal or disassembly.
What’s included
One Nitro Series front shock absorber with a red boot.








