Overview
The Skyjacker Softride Nitro N8088 is a rear shock absorber for selected Jeep models from 1974 to 2013 and the 2007–2011 Dodge Nitro. Its lift height range is w/2 in. Lift. It is made for suspension lifts only and will not lift the vehicle on its own.
The N8088 can be used front or rear and is mostly used in heavy-duty and severe off-road work, though it is a little stiff for most street applications. It is a gas-charged unit with 150 PSI nitrogen, an oversized piston head and a 5/8 in. hardened double chrome rod.
Key features
- Oversized piston head for the damping circuit
- Internal rebound bumper
- Multi-stage velocity sensitive valving
- Twin tube construction with nitrogen gas at 150 PSI
- 5/8 in. diameter hardened double chrome rod
- Urethane bushings and a red polyurethane boot
- Compression control that reduces fade by limiting air bubbles.
- White body finish
Lift components and lift-only shocks
A shock designed for suspension lifts works alongside a lift component that sets the ride height, so the shock alone will not raise the vehicle. On older Jeep models, that often means springs, blocks or control arm parts chosen for the same application.
Before installing, confirm the height gained from the lift component and compare it with the lift note on the shock. A shock working at the wrong length can bottom out or strain its mounts, so measure the installed position with the vehicle at rest.
Because the unit can be used front or rear, record the axle it was installed on for future reference. Inspect the bushings and rod for wear during routine service, and replace the shock in pairs when one side shows leaks or loss of control.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | N8088 |
| UPC | 803696154930 |
| Series | Softride Nitro |
| Position | Rear (usable front or rear per the manufacturer) |
| Extended length | 24.84 in. |
| Collapsed length | 14.82 in. |
| Gas charge | 150 PSI nitrogen |
| Rod | 5/8 in. diameter, hardened, double chrome |
| Bushings | Urethane |
| Boot | Red polyurethane |
| Color | White |
| Lift height note | w/2 in. Lift (suspension lifts only) |
Vehicle fitment
It fits the 1974–1983 Jeep Cherokee (SJ) and Wagoneer (SJ), the 1984–1991 Grand Wagoneer (SJ), the 1974–1988 J10 and J20, the 1987–1995 Wrangler (YJ), the 2002–2012 Liberty (KJ), the 2006–2010 Commander (XK), the 2005 Grand Cherokee (WJ), the 2006–2013 Grand Cherokee (WK), and the 2007–2011 Dodge Nitro.
It does not fit the Cherokee XJ, the Grand Cherokee ZJ, the Wrangler TJ, LJ, JK or JL, or Dodge models other than the Nitro. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
This shock is for suspension lifts only and will not lift the vehicle, so the height must come from a separate lift component. Confirm the installed position on your vehicle, since it can be used front or rear.
What’s included
The package contains one shock absorber with a red polyurethane boot.
Not included: any lift component that provides the lift, and the shock for the opposite side.







